一种新型规整填料的传质及压降特性

摘要采用非介入的表面反应气相传质实验来测定规整填料表面的传质系数分布,在此基础上建立了波纹规整填料的流动及传质CFD模型。采用该CFD模型与正交试验开发了一种新型填料,其通道的形状区别于传统波纹规整填料的三角形,采用具有更大水力半径的四边形。CFD模拟结果表明经过几何结构优化后的新型填料在保持良好传质性能的同时,压降减小22.22%~23.03%。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	秦涛
	朱慧铭

关键词：规整填料计算流体力学传质压降

Abstract： A flow dynamics and mass transfer CFD model was established based on non-intrusive surface reaction gas mass transfer experiments which were carried out to measure the distribution of mass transfer coefficient on the surface of structured packings. A new type of packing was developed using the CFD model and orthogonal experiments. The channel shape of the new packing is modified from the traditional triangle to a quadrangle to increase the hydraulic radius. The CFD simulation results show that the new packing with optimized geometry can reduce the pressure drop by 22.22%~23.03% while maintaining good mass transfer performance.

Keywords： structured packing computational fluid dynamics mass transfer pressure drop

Received 2022-06-10;

Fund:国家重点研发计划重点专项项目(2017YFB0603701)。

Corresponding Authors: 朱慧铭,副研究员,hzhu@tju.edu.cn Email: hzhu@tju.edu.cn

About author: 秦涛(1996—),男,硕士研究生,现从事化工传质传热及分离方面的研究。

引用本文:

秦涛, 朱慧铭.一种新型规整填料的传质及压降特性[J]. 化学工业与工程, 2025,42(1): 148-156

QIN Tao, ZHU Huiming.Characteristics of mass transfer and pressure drop of a new structured packing[J]. Chemcial Industry and Engineering, 2025,42(1): 148-156

[1] 李群生, 毛明华. 化工分离工程中的节能降耗的研究及其应用[C]//全国化工合成氨设计技术中心站:2003年技术交流会论文集,2003 LI Qunsheng, MAO Minghua. Research and application of energy saving and consumption reduction in chemical separation engineering[C]//Proceedings of the 2003 Technical Exchange Conference of the National Chemical Ammonia Design Technology Center Station, 2003 (in Chinese)
[2] DE HAAN A B, DE GRAAUW J. Mass transfer in supercritical extraction columns with structured packings for hydrocarbon processing[J]. Industrial & Engineering Chemistry Research, 1991, 30(11): 2463-2470
[3] SIMOES P C, MATOS H A, CARMELO P J, et al. Mass transfer in countercurrent packed columns: Application to supercritical CO₂ extraction of terpenes[J]. Industrial & Engineering Chemistry Research, 1995, 34(2): 613-618
[4] WRO?SKI S, MOLGA E. Mass transfer model for the film countercurrent flow of two liquid phases in a packed bed column[J]. Chemical Engineering and Processing: Process Intensification, 1998, 37(1): 47-54
[5] WEN X, AFACAN A, NANDAKUMAR K, et al. Development of a novel vertical-sheet structured packing[J]. Chemical Engineering Research and Design, 2005, 83(5): 515-526
[6] LUO S, FEI W, SONG X, et al. Effect of channel opening angle on the performance of structured packings[J]. Chemical Engineering Journal, 2008, 144(2): 227-234
[7] OLENBERG A, RESCHETNIK W, KULLMER G, et al. Optimization of structured packings using twisted tape inserts[J]. Chemical Engineering Research and Design, 2018, 132: 1-8
[8] SUN B, BHATELIA T, UTIKAR R P, et al. Hydrodynamics of a novel 3D printed structured packing-SpiroPak[J]. Chemical Engineering and Processing-Process Intensification, 2021, 167: 108533
[9] PETRE C F, LARACHI F, ILIUTA I, et al. Pressure drop through structured packings: Breakdown into the contributing mechanisms by CFD modeling[J]. Chemical Engineering Science, 2003, 58(1): 163-177
[10] KHOSRAVI NIKOU M R, EHSANI M R. Turbulence models application on CFD simulation of hydrodynamics, heat and mass transfer in a structured packing[J]. International Communications in Heat and Mass Transfer, 2008, 35(9): 1211-1219
[11] RAFATI SALEH A, HOSSEINI S H, SHOJAEE S, et al. CFD studies of pressure drop and increasing capacity in MellapakPlus 752.Y structured packing[J]. Chemical Engineering & Technology, 2011, 34(9): 1402-1412
[12] HAROUN Y, RAYNAL L, LEGENDRE D. Mass transfer and liquid hold-up determination in structured packing by CFD[J]. Chemical Engineering Science, 2012, 75: 342-348
[13] SEBASTIA-SAEZ D, GU S, RANGANATHAN P, et al. Meso-scale CFD study of the pressure drop, liquid hold-up, interfacial area and mass transfer in structured packing materials[J]. International Journal of Greenhouse Gas Control, 2015, 42: 388-399
[14] ZHANG Y, ZHU H, YIN Q. CFD study on the local mass transfer efficiency in the gas phase of structured packing[J]. Chemical Engineering & Technology, 2013, 36(7): 1138-1146
[15] KOTTKE V, KVHNEL W, BECKER S. A new technique for visualization and determination of local mass transfer at solid walls in liquid flow[M]//Flow Visualization VI. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992: 535-539
[16] GAISER G, KOTTKE V. Flow phenomena and local heat and mass transfer in corrugated passages[J]. Chemical Engineering & Technology, 1989, 12(1): 400-405
[17] MULLIN J W. The effect of maldistribution on the performance of packed columns[J]. Industrial Chemist, 1957, 33: 408-417
[18] RAYNAL L, BOYER C, BALLAGUET J P. Liquid holdup and pressure drop determination in structured packing with CFD simulations[J]. The Canadian Journal of Chemical Engineering, 2004, 82(5): 871-879
[19] MACFARLAN L H, SEIBERT A F, PHAN M T, et al. CFD-based study on structured packing geometry[J]. Chemical Engineering Science, 2021, 243: 116767
[20] SOGIN H H. Sublimation from disks to air streams flowing normal to their surfaces[J]. Journal of Fluids Engineering, 1958, 80(1): 61-67
[21] OLUJIC Z, JANSEN H, KAIBEL B, et al. Stretching the capacity of structured packings[J]. Industrial & Engineering Chemistry Research, 2001, 40(26): 6172-6180