[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2023, Vol. 40 Issue (6) :78-88    DOI: 10.13353/j.issn.1004.9533.20230158
化工过程与设备 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
气-固循环流化床螺旋板式换热器的传热性能与压降
姜峰1,3, 孙兴一1, 齐国鹏2, 李修伦1
1. 天津大学化工学院, 天津 300072;
2. 天津职业大学生物与环境工程学院, 天津 300410;
3. 天津市化工安全与装备技术重点实验室, 天津 300350
Thermal performance and pressure drop in a gas-solid circulating fluidized bed spiral plate heat exchanger
JIANG Feng1,3, Sun Xingyi1, QI Guopeng2, LI Xiulun1
1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
2. School of Biological and Environment Engineering, Tianjin Vocational Institute, Tianjin 300410, China;
3. Tianjin Key Laboratory of Chemical Process Safety and Equipment Technology, Tianjin 300350, China

摘要
参考文献
相关文章
Download: PDF (7836KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
文章导读  
摘要 设计并搭建了气-固循环流化床螺旋板式换热装置,研究了空气流量(80~125 m3·h-1)、颗粒加入量(0.5%~2.0%)和颗粒类型等操作参数对以恒温水作为热流体、空气作为冷流体、3种固体颗粒作为固相工作介质的循环流化床螺旋板式换热器传热性能和压降的影响。实验的结果显示,添加颗粒可以明显改善螺旋板式换热器的传热性能,但同时也会增大压降。在实验考察的操作参数范围内,强化传热效果最佳时的传热增强因子可以达到29.28%,此时系统内添加的颗粒为聚甲醛颗粒,空气流量为125 m3·h-1,颗粒加入量为2.0%,但相应的压降比率也达到了20.86%。绘制了传热增强因子和压降比率的三维图以及综合影响雷达图,可指导工业应用。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
姜峰
孙兴一
齐国鹏
李修伦
关键词气-固循环流化床   传热性能的强化   压降   螺旋板式换热器     
Abstract: In this study, the fluidized bed heat transfer and fouling prevention technology is applied to the gas-phase heat transfer process in spiral plate heat exchanger, and a gas-solid circulating fluidized bed spiral plate heat exchanger is designed and built. The effects of operating parameters such as air flow rate (80—125 m3·h-1), particle addition (0.5%—2.0%) and particle type on the heat transfer performance and pressure drop of circulating fluidized bed spiral plate heat exchanger using constant temperature water as hot fluid, air as cold fluid and three kinds of solid particles as solid working medium are studied. The experimental results show that the addition of particles can obviously improve the heat transfer performance of the spiral plate heat exchanger, but also increase the pressure drop. Within the range of operating parameters investigated in the experiment, the heat transfer enhancement factor of the best heat transfer enhancement effect can reach 29.28%. At this time, the particles added in the system are polyformaldehyde particles, the air flow rate is 125 m3·h-1, and the amount of added particles is 2.0%, but the corresponding pressure drop ratio also reaches 20.86%. The three-dimensional diagrams of heat transfer enhancement factor and pressure drop ratio and the comprehensive influence radar diagrams are drawn which can guide the industrial applications.
Keywordsgas-solid circulating fluidized bed   enhancement of heat transfer performance   pressure drop   spiral plate heat exchanger     
Received 2023-04-05;
Fund:化学工程国家重点实验室开放项目(SKL-CHE-18B03);天津市科技支撑计划重点项目(2009ZCKFGX01900)。
Corresponding Authors: 姜峰,副教授,E-mail:jiangfeng@tju.edu.cn。     Email: jiangfeng@tju.edu.cn
About author: 姜峰(1975-),男,博士,副教授,现从事多相流强化传热与防、除垢方面的研究。
引用本文:   
姜峰, 孙兴一, 齐国鹏, 李修伦.气-固循环流化床螺旋板式换热器的传热性能与压降[J].  化学工业与工程, 2023,40(6): 78-88
JIANG Feng, Sun Xingyi, QI Guopeng, LI Xiulun.Thermal performance and pressure drop in a gas-solid circulating fluidized bed spiral plate heat exchanger[J].  Chemcial Industry and Engineering, 2023,40(6): 78-88
Copyright 2010 by 化学工业与工程