[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2023, Vol. 40 Issue (5) :123-134    DOI: 10.13353/j.issn.1004.9533.20210858
能源与环境化工 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
糠醛衍生物在盐酸溶液中的缓蚀性能研究
史雪磊1,2,3,4, 王纪孝1,2,3,4, 高敏1,2,3,4, 宋双双1,2,3,4, 丛畅1,2,3,4, 吴昌豪1,2,3,4, 王志1,2,3,4
1. 天津大学化工学院, 天津 300350;
2. 天津大学化学工程联合国家重点实验室, 天津 300350;
3. 天津市膜科学与海水淡化技术重点实验室, 天津 300350;
4. 天津化学化工协同创新中心, 天津 300072
Corrosion inhibition performance of furfural derivatives in hydrochloric acid solution
SHI Xuelei1,2,3,4, WANG Jixiao1,2,3,4, GAO Min1,2,3,4, SONG Shuangshuang1,2,3,4, CONG Chang1,2,3,4, WU Changhao1,2,3,4, WANG Zhi1,2,3,4
1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China;
2. State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300350, China;
3. Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin 300350, China;
4. Collaborative Innovation Center of Chemical Science and Technology, Tianjin University, Tianjin 300072, China

摘要
参考文献
相关文章
Download: PDF (4410KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 以生物废料的提取物为原料制备绿色环保型缓蚀剂是重要的研究方向,糠醛是来源于生物质最有前途的化学平台物质之一。利用糠醛与三聚氰胺缩合制备了新型高效绿色缓蚀剂,即N2-(2-呋喃亚甲基)-1,3,5-三嗪-2,4,6-三胺(FMA),考察了FMA在1.0 mol·L-1 HCl溶液中对低碳钢的缓蚀性能。室温静态失重结果表明,当FMA浓度为200 mg·L-1时,缓蚀效率达95.14%;即使在338 K温度下,FMA缓蚀效率仍保持在90%以上;电化学测试结果表明,FMA为以抑制阳极过程为主的混合型缓蚀剂,其优异的缓蚀性能归因于能够在低碳钢表面形成符合Langmuir等温吸附模型的吸附膜;扫描电子显微镜(SEM)结果表明,表面含FMA的低碳钢在1.0 mol·L-1 HCl溶液中浸泡6 h后,钢板表面依旧光滑平整。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
史雪磊
王纪孝
高敏
宋双双
丛畅
吴昌豪
王志
关键词腐蚀   生物质   电化学   糠醛   呋喃基席夫碱   缓蚀剂     
Abstract: It is a hot research point to prepare green corrosion inhibitors with bio-wastes as raw materials. Furfural is one of the most promising chemical platforms derived from biomass. Here, a new high-efficiency corrosion inhibitor, namely N2-(2-furylidene)-1,3,5-triazine-2,4,6-triamine (FMA), was prepared by condensation reaction of furfural and melamine. Corrosion inhibition performance of FMA in 1.0 mol·L-1 HCl was characterized by weight loss test, electrochemical measurement and surface characterization. The static weight loss test results under room temperature condition show that the corrosion inhibition efficiency is as high as 95.14% under the condition of the FMA concentration at 200 mg·L-1, while the temperature is up to 338 K, the corresponding corrosion inhibition efficiency remains above 90%. The electrochemical test results show that FMA is a mixed type corrosion inhibitor that mainly inhibits anode process, and its excellent corrosion inhibition performance is attributed to the ability to form an adsorption film on the surface of mild steel that obeys the Langmuir isotherm adsorption model.Scanning electron microscopy (SEM) results show that the surface of mild steel containing FMA is still smooth flat after being immersed in 1.0 mol·L-1 HCl solution for 6 hours.
Keywordscorrosion   biomass   electrochemistry   furfural   furanyl Schiff base   corrosion inhibitor     
Received 2021-12-09;
Fund:化学工程联合国家重点实验室探索性课题(SKLoChE-17T01)。
Corresponding Authors: 王纪孝,教授,E-mail:jxwang@tju.edu.cn。     Email: jxwang@tju.edu.cn
About author: 史雪磊(1997-),男,硕士研究生,现从事金属防腐方面的研究。
引用本文:   
史雪磊, 王纪孝, 高敏, 宋双双, 丛畅, 吴昌豪, 王志.糠醛衍生物在盐酸溶液中的缓蚀性能研究[J].  化学工业与工程, 2023,40(5): 123-134
SHI Xuelei, WANG Jixiao, GAO Min, SONG Shuangshuang, CONG Chang, WU Changhao, WANG Zhi.Corrosion inhibition performance of furfural derivatives in hydrochloric acid solution[J].  Chemcial Industry and Engineering, 2023,40(5): 123-134
Copyright 2010 by 化学工业与工程