[1] WILLIAMS P, REED A. Development of activated carbon pore structure via physical and chemical activation of biomass fibre waste[J]. Biomass and Bioenergy, 2006, 30(2): 144-152
[2] RIDHA H, AL-AZAWY M G. Effect of wall heat transfer on the fluidization process[J]. International Journal of Heat and Technology, 2021, 39(2): 615-620
[3] MA S, ZHENG J, ZHAO J, et al. Experimental analysis on thermodynamic stability and methane leakage during solid fluidization process of methane hydrate[J]. Fuel, 2021, 284: 119020
[4] NATH H, SAHOO P, SAHOO A. Characterization of Red Mud treated under high temperature fluidization[J]. Powder Technology, 2015, 269: 233-239
[5] VICENTE J, MONTERO C, EREÑA J, et al. Coke deactivation of Ni and Co catalysts in ethanol steam reforming at mild temperatures in a fluidized bed reactor[J]. International Journal of Hydrogen Energy, 2014, 39(24): 12586-12596
[6] XUE Y, ZHOU S, BROWN R C, et al. Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor[J]. Fuel, 2015, 156: 40-46
[7] WANG C, ZHU C, HUANG J, et al. Enhancement of depolymerization slag gasification in supercritical water and its gasification performance in fluidized bed reactor[J]. Renewable Energy, 2021, 168: 829-837
[8] BEHJAT Y, SHAHHOSSEINI S, HASHEMABADI S H. CFD modeling of hydrodynamic and heat transfer in fluidized bed reactors[J]. International Communications in Heat and Mass Transfer, 2008, 35(3): 357-368
[9] LU H, HE Y, GIDASPOW D. Hydrodynamic modelling of binary mixture in a gas bubbling fluidized bed using the kinetic theory of granular flow[J]. Chemical Engineering Science, 2003, 58(7): 1197-1205
[10] XING X, ZHANG C, JIANG B, et al. Numerical study of the effect of the inlet gas distributor on the bubble distribution in a bubbling fluidized bed[J]. Chemical Engineering Research and Design, 2022, 177: 70-82
[11] GRACE J R, TAGHIPOUR F. Verification and validation of CFD models and dynamic similarity for fluidized beds[J]. Powder Technology, 2004, 139(2): 99-110
[12] 武恒, 金亚丹, 康守国, 等. 气固流化床CFD模拟曳力模型的选用及验证 [C]//Ansys中国技术大会. 安世亚太科技股份有限公司, 2014
[13] BI H T, ELLIS N, ABBA I A, et al. A state-of-the-art review of gas-solid turbulent fluidization[J]. Chemical Engineering Science, 2000, 55(21): 4789-4825
[14] 曹玉春, 吴金星, 李言钦, 等. 基于欧拉-欧拉模型的气固鼓泡床数值模拟研究[J]. 热力发电, 2008, 37(11): 35-38 CAO Yuchun, WU Jinxing, LI Yanqin, et al. Study on numerical simulation of gas-solid flowin bubbling bed based on Eulerian-Eulerian model[J]. Thermal Power Generation, 2008, 37(11): 35-38(in Chinese)
[15] TSUJI Y, TANAKA T, YONEMURA S. Cluster patterns in circulating fluidized beds predicted by numerical simulation (discrete particle model versus two-fluid model)[J]. Powder Technology, 1998, 95(3): 254-264
[16] SAHOO P, SAHOO A. A comparative study on effect of different parameters of CFD modeling for gas-solid fluidized bed[J]. Particulate Science and Technology, 2015, 33(3): 273-289
[17] SCHMIDT A, RENZ U. Numerical prediction of heat transfer in fluidized beds by a kinetic theory of granular flows[J]. International Journal of Thermal Sciences, 2000, 39(9/10/11): 871-885
[18] SINGH R I, BRINK A, HUPA M. CFD modeling to study fluidized bed combustion and gasification[J]. Applied Thermal Engineering, 2013, 52(2): 585-614
[19] WANG T, WANG S, SHEN Y. Particle-scale study of gas-solid flows in a bubbling fluidised bed: Effect of drag force and collision models [J]. Powder Technology, 2021, 384: 353-367
[20] ADNAN M, SUN J, AHMAD N, et al. Validation and sensitivity analysis of an Eulerian-Eulerian two-fluid model (TFM) for 3D simulations of a tapered fluidized bed[J]. Powder Technology, 2022, 396: 490-518
[21] SYAMLAL M, O’BRIEN T J. Simulation of granular layer inversion in liquid fluidized beds[J]. International Journal of Multiphase Flow, 1988, 14(4): 473-481
[22] DIMITRI G, RUKMINI B J D. Hydrodynamics of circulating fluidized beds: Kinetic theory approach [R]. Illinois Institute of Technology, Department of Chemical Engineering, Chicago, IL, USA,1991
[23] WEN C, YU Y. Mechanics of fluidization [J]. Chem Eng Prog Symp Ser, 1966
[24] LU H, GIDASPOW D. Hydrodynamics of binary fluidization in a riser: CFD simulation using two granular temperatures[J]. Chemical Engineering Science, 2003, 58(16): 3777-3792
[25] GIBILARO L G, DI FELICE R, WALDRAM S P, et al. Generalized friction factor and drag coefficient correlations for fluid-particle interactions[J]. Chemical Engineering Science, 1985, 40(10): 1817-1823
[26] ADAM A M M M, BORRÀS N, PÉREZ E, et al. Electrochemical corrosion of an Al-Mg-Cr-Mn alloy containing Fe and Si in inhibited alkaline solutions[J]. Journal of Power Sources, 1996, 58(2): 197-203
[27] GERA D, GAUTAM M, TSUJI Y, et al. Computer simulation of bubbles in large-particle fluidized beds[J]. Powder Technology, 1998, 98(1): 38-47
[28] RAO B M, RAO K S, RANGA JANARDHANA G. CFD analysis of hydrodynamic studies of a bubbling fluidized bed[J]. IOP Conference Series: Materials Science and Engineering, 2018, 330: 012090
|
2025, Vol. 42 
