[1] 李群生, 毛明华. 化工分离工程中的节能降耗的研究及其应用[C]//全国化工合成氨设计技术中心站:2003年技术交流会论文集,2003 LI Qunsheng, MAO Minghua. Research and application of energy saving and consumption reduction in chemical separation engineering[C]//Proceedings of the 2003 Technical Exchange Conference of the National Chemical Ammonia Design Technology Center Station, 2003 (in Chinese)
[2] DE HAAN A B, DE GRAAUW J. Mass transfer in supercritical extraction columns with structured packings for hydrocarbon processing[J]. Industrial & Engineering Chemistry Research, 1991, 30(11): 2463-2470
[3] SIMOES P C, MATOS H A, CARMELO P J, et al. Mass transfer in countercurrent packed columns: Application to supercritical CO2 extraction of terpenes[J]. Industrial & Engineering Chemistry Research, 1995, 34(2): 613-618
[4] WRO?SKI S, MOLGA E. Mass transfer model for the film countercurrent flow of two liquid phases in a packed bed column[J]. Chemical Engineering and Processing: Process Intensification, 1998, 37(1): 47-54
[5] WEN X, AFACAN A, NANDAKUMAR K, et al. Development of a novel vertical-sheet structured packing[J]. Chemical Engineering Research and Design, 2005, 83(5): 515-526
[6] LUO S, FEI W, SONG X, et al. Effect of channel opening angle on the performance of structured packings[J]. Chemical Engineering Journal, 2008, 144(2): 227-234
[7] OLENBERG A, RESCHETNIK W, KULLMER G, et al. Optimization of structured packings using twisted tape inserts[J]. Chemical Engineering Research and Design, 2018, 132: 1-8
[8] SUN B, BHATELIA T, UTIKAR R P, et al. Hydrodynamics of a novel 3D printed structured packing-SpiroPak[J]. Chemical Engineering and Processing-Process Intensification, 2021, 167: 108533
[9] PETRE C F, LARACHI F, ILIUTA I, et al. Pressure drop through structured packings: Breakdown into the contributing mechanisms by CFD modeling[J]. Chemical Engineering Science, 2003, 58(1): 163-177
[10] KHOSRAVI NIKOU M R, EHSANI M R. Turbulence models application on CFD simulation of hydrodynamics, heat and mass transfer in a structured packing[J]. International Communications in Heat and Mass Transfer, 2008, 35(9): 1211-1219
[11] RAFATI SALEH A, HOSSEINI S H, SHOJAEE S, et al. CFD studies of pressure drop and increasing capacity in MellapakPlus 752.Y structured packing[J]. Chemical Engineering & Technology, 2011, 34(9): 1402-1412
[12] HAROUN Y, RAYNAL L, LEGENDRE D. Mass transfer and liquid hold-up determination in structured packing by CFD[J]. Chemical Engineering Science, 2012, 75: 342-348
[13] SEBASTIA-SAEZ D, GU S, RANGANATHAN P, et al. Meso-scale CFD study of the pressure drop, liquid hold-up, interfacial area and mass transfer in structured packing materials[J]. International Journal of Greenhouse Gas Control, 2015, 42: 388-399
[14] ZHANG Y, ZHU H, YIN Q. CFD study on the local mass transfer efficiency in the gas phase of structured packing[J]. Chemical Engineering & Technology, 2013, 36(7): 1138-1146
[15] KOTTKE V, KVHNEL W, BECKER S. A new technique for visualization and determination of local mass transfer at solid walls in liquid flow[M]//Flow Visualization VI. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992: 535-539
[16] GAISER G, KOTTKE V. Flow phenomena and local heat and mass transfer in corrugated passages[J]. Chemical Engineering & Technology, 1989, 12(1): 400-405
[17] MULLIN J W. The effect of maldistribution on the performance of packed columns[J]. Industrial Chemist, 1957, 33: 408-417
[18] RAYNAL L, BOYER C, BALLAGUET J P. Liquid holdup and pressure drop determination in structured packing with CFD simulations[J]. The Canadian Journal of Chemical Engineering, 2004, 82(5): 871-879
[19] MACFARLAN L H, SEIBERT A F, PHAN M T, et al. CFD-based study on structured packing geometry[J]. Chemical Engineering Science, 2021, 243: 116767
[20] SOGIN H H. Sublimation from disks to air streams flowing normal to their surfaces[J]. Journal of Fluids Engineering, 1958, 80(1): 61-67
[21] OLUJIC Z, JANSEN H, KAIBEL B, et al. Stretching the capacity of structured packings[J]. Industrial & Engineering Chemistry Research, 2001, 40(26): 6172-6180
|
2025, Vol. 42 
