化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2025, Vol. 42 Issue (2) :166-176    DOI: 10.13353/j.issn.1004.9533.20232037
Current Issue | Next Issue | Archive | Adv Search << | >>
Simulation study of the susceptor assisted microwave high-temperature reactor heating based on fully coupled electromagnetic thermal fluid
WANG Xianfeng1, SHANG Xiaobiao1,2,3, WANG Wenbo1, FAN Huili1, ZHANG Qun1, ZHOU Jiashen1
1. Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China;
2. Key Laboratory of Unconventional Metallurgy of Ministry of Education, Kunming 650093, China;
3. National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Kunming 650093, China

Abstract
Reference
Related Articles
Download: PDF (5504KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract Microwave heating is widely used in the industrial field because of its high efficiency, fast and uniform characteristics. However, due to the selective heating characteristic, the coupling effect between microwave and weak microwave absorbing material is not obvious, which limits the application of microwave in industrial field. Therefore, the external susceptor (SiC) was introduced into the microwave reactor, and a finite element simulation model was established based on the electromagnetic-thermal-fluid coupling theory to explore the influence of different receptor configuration on the microwave heating of weak absorbing materials. The results show that the design of the external susceptors should not only consider the influence of the external susceptors on the electric field distribution of materials, but also consider the energy transfer between materials and susceptors, so as to achieve the optimal energy conversion balance between the susceptors assisted heating and the microwave volume heating material; When the susceptor is placed on both sides of the material and parallel to the waveguide side, the assisted heating effect is the best, the average temperature at 500 s is 918.86 ℃, and the COVT is 0.133 6; In high-temperature microwave reactor, thermal radiation is the main heat transfer mode, and the higher the temperature, the more intense the heat transfer.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
WANG Xianfeng
SHANG Xiaobiao
WANG Wenbo
FAN Huili
ZHANG Qun
ZHOU Jiashen
Keywordsmicrowave reactor   weak microwave absorbing materials   susceptor   heating efficiency   numerical simulation     
Received 2023-12-20;
About author:
Cite this article:   
WANG Xianfeng, SHANG Xiaobiao, WANG Wenbo, FAN Huili, ZHANG Qun, ZHOU Jiashen.Simulation study of the susceptor assisted microwave high-temperature reactor heating based on fully coupled electromagnetic thermal fluid[J]  Chemcial Industry and Engineering, 2025,V42(2): 166-176
Copyright 2010 by Chemcial Industry and Engineering