[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2018, Vol. 35 Issue (5) :19-27    DOI: 10.13353/j.issn.1004.9533.20161083
能源与环境化工 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
KOH活化石墨毡阳极用于印刷电路板蚀刻液的电解再生
王春振, 张文, 王宇新
天津大学化工学院, 化学工程联合国家重点实验室, 天津化学化工协同创新中心, 天津市膜科学与海水淡化技术重点实验室, 天津 300350
Preparation and Performance of KOH Activated Graphite Felt Anode for Electrolytic Regeneration of PCB Etchant
Wang Chunzhen, Zhang Wen, Wang Yuxin
School of Chemical Engineering and Technology, State Key Laboratory of Chemical Engineering, Co-Innovation Center of Chemical Science & Engineering, Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin 300350, China

摘要
参考文献
相关文章
Download: PDF (2174KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 石墨毡电极的润湿性和电化学活性对印刷电路板蚀刻液电解再生装置的性能有重要影响。在900℃下,用KOH对石墨毡进行活化处理,并将KOH活化石墨毡作为电解池阳极对酸性蚀刻废液进行电解再生。用SEM、XPS表征和分析了活化前后石墨毡炭纤维的表面形貌和元素组成。通过循环伏安(CV)和电化学阻抗谱(EIS)分析了石墨毡电极的电化学性能。结果表明,KOH活化石墨毡炭纤维表面含氧量由原始石墨毡的2.60%(原子百分数,下同)增加到6.27%,润湿性得到改善。缺陷C数量增多,对Cu(I)电化学氧化活性提高。KOH活化石墨毡比表面积较原始石墨毡增加了约42倍。KOH活化石墨毡用于电解实验,阳极电势和槽电压较原始石墨毡分别降低0.10和0.05~0.06 V。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
王春振
张文
王宇新
关键词石墨毡   电解再生   蚀刻液   KOH活化     
Abstract: The wettability and electrochemical activity of the graphite felt (GF) have a significant impact on the performance of the apparatus for electrolytic regeneration of PCB etchant. GF activated with KOH at 900℃ is employed as the anode of the cell for electrolytic regeneration of acidic CuCl2 etchant. The morphology and the element composition of activated GF and untreated GF are characterized by SEM and XPS, respectively. The electrochemical performance of the two GF electrodes is evaluated through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that the oxygen content of the activated GF increases to 6.27at% from 2.60at% of the untreated GF, and the wettability is improved. The electrochemical activity towards oxidation of Cu (I) is improved, which can be ascribed to the increase of the number of the defective carbon. The BET specific surface of the GF increases by~42 times after KOH activation. The anode potential and the cell voltage of the activated GF decreases by 0.10 V and 0.05~0.06 V,respectively,compared with the untreated GF in the etchant electrolytic regeneration experiment.
Keywordsgraphite felt;   electrolytic regeneration;   etchant;   KOH activation     
Received 2016-04-26;
Fund:天津市科技计划项目(15ZCZDSF00040)。
Corresponding Authors: 王宇新,E-mail:yxwang@tju.edu.cn。     Email: yxwang@tju.edu.cn
About author: 王春振(1989-),男,硕士研究生,现从事印刷电路板酸性蚀刻液的电解再生和铜回收方面的研究。
引用本文:   
王春振, 张文, 王宇新.KOH活化石墨毡阳极用于印刷电路板蚀刻液的电解再生[J].  化学工业与工程, 2018,35(5): 19-27
Wang Chunzhen, Zhang Wen, Wang Yuxin.Preparation and Performance of KOH Activated Graphite Felt Anode for Electrolytic Regeneration of PCB Etchant[J].  Chemcial Industry and Engineering, 2018,35(5): 19-27
Copyright 2010 by 化学工业与工程