Research on Shale Oil as Raw Material of FCC

Abstract In order to meet the feed requirements for FCC,shale oil was treated by oxidation and compl- exation,to extrude the basic nitrogen components and to reduce the total nitrogen content of shale oil. TYPE ZD-2 automatic potentiometer titrator and REN-1000B chemiluminescence determination of nitrogen instrument were used to in the single-factor experiments and orthogonal tests. The optimum operation conditions were obtained: the reaction temperature is 70 �� ,reaction time is 20 min,ratio between oxidant reagent and oil is 0. 068�� 1. The results showed that,with a simple experimental method and a small amount of reagent,the total nitrogen content of shale oil could be reduced to 3 925. 29 ��g /g,which can meet the requirement of FCC feed,but the loss of oil after pretreatment of raw materials has not yet reached the ideal state.

	Service

	Email this article
	Add to my bookshelf
	Add to citation manager
	Email Alert
	RSS
	Articles by authors

Keywords��

Received 2010-05-15; published 2010-05-15

Cite this article:

ZHOU Chuan-zhi,LI Dong-sheng,LIU Jie .Research on Shale Oil as Raw Material of FCC[J] Chemcial Industry and Engineering, 2010,V27(3): 241-246