化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2017, Vol. 34 Issue (6) :81-87    DOI: 10.13353/j.issn.1004.9533.20161066
Current Issue | Next Issue | Archive | Adv Search << | >>
The Flow Pattern and Mass Transfer of Gas-Liquid-LiquidThree Phase Flow in Microchannel
Xun Tao, Cai Wangfeng, Zhang Xubin
School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China

Abstract
Reference
Related Articles
Download: PDF (1837KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract 

The double T-junction microchannel was used to research the flow pattern and mass transfer of gas-liquid-liquid three phase flow in microchannel.30% TBP(in cyclohexane)-acetic acid-water was chosen as extraction system,and air as inserting gas.Effect of void fraction expressed as α (ratio of gas volume flow rate to total volume flow rate) and volume ratio of organic phase to aqueous phase expressed as q on flow regime and mass transfer were experimentally investigated.The overall volumetric mean mass transfer coefficient kLa was correlated with q,Reynolds number of gas phase Reg and mean Reynolds number of liquid phase ReM.With the introduction of gas,gas-liquid-liquid slug flow can be formed instead of liquid-liquid parallel flow.The mass transfer coefficient of gas-liquid-liquid slug flow is also significantly enhanced because of the high dispersion of two immiscible liquid phase and the internal circulation effect.

Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
Xun Tao
Cai Wangfeng
Zhang Xubin
Keywordsmicrochannel;   gas-liquid-liquid slug flow;   flow pattern;   mass transfer coefficient     
Received 2016-04-12;
About author:
Cite this article:   
Xun Tao, Cai Wangfeng, Zhang Xubin.The Flow Pattern and Mass Transfer of Gas-Liquid-LiquidThree Phase Flow in Microchannel[J]  Chemcial Industry and Engineering, 2017,V34(6): 81-87
Copyright 2010 by Chemcial Industry and Engineering