[1] Kaibel G. Distillation columns with vertical partitions[J]. Chemical Engineering & Technology, 1987,10(1):92-98
[2] Humphrey J L, Siebert A F. Separation technologies:An opportunity for energy savings[J]. Chemical Engineering Progress, 1992, 88(3):32-41
[3] Dünnebier G, Pantelides C C. Optimal design of thermally coupled distillation columns[J]. Industrial & Engineering Chemistry Research, 1999, 38(1):162-176
[4] Yeomans H, Grossmann I. Optimal design of complex distillation columns using rigorous tray-by-tray disjunctive programming models[J]. Industrial & Engineering Chemistry Research, 2000, 39(11):4326-4335
[5] Cerda J, Westerberg A W. Shortcut methods for complex distillation columns. 1. Minimum reflux[J]. Industrial & Engineering Chemistry Process Design and Development, 1981, 20(3):546-557
[6] Triantafyllou C, Smith R. The design and optimization of fully thermally coupled distillation columns[J]. Transactions of the Institution of Chemical Engineers, 1992, 70:118-132
[7] Kim Y H. Rigorous design of fully thermally coupled distillation column[J]. Journal of Chemical Engineering of Japan, 2001, 34(2):236-243
[8] Rev E, Emtir M, Szitkai Z, et al. Energy savings of integrated and coupled distillation systems[J]. Computers & Chemical Engineering, 2001, 25(1):119-140
[9] Abdul M I, Zeglam A O, Smith R. Operation and control of dividing wall columns:Part 2:Simulation and pilot plant studies using temperature control[J]. Transactions of the Institution of Chemical Engineers, 1998, 76:319-334
[10] Adrian T, Schoenmakers H, Boll M. Model predictive control of integrated unit operations:Control of a divided wall column[J]. Chemical Engineering and Processing, 2004, 43:347-355
[11] Ling H, Luyben W L. Temperature control of the BTX divided-wall column[J]. Industrial & Engineering Chemistry Research, 2010, 49:189-203
[12] Caballero J A, Grossmann I E. Aggregated models for integrated distillation systems[J]. Industrial & Engineering Chemistry Research, 1999, 38:2330-2334
[13] Caballero J A, Grossmann I E. Design of distillation sequences:From conventional to fully thermally coupled distillation systems[J]. Computers & Chemical Engineering, 2004, 28(11):2307-2329
[14] Nelly R C, Arturo J G, Angel C A, et al. Optimum design of Petlyuk and divided-wall distillation systems using a shortcut model[J]. Chemical Engineering Research and Design, 2010, 88:1405-1418
[15] Amminudin K A, Smith R, Thong D Y, et al. Design and optimization of fully thermally coupled distillation columns:Part 1:Preliminary design and optimization methodology[J]. Chemical Engineering Research and Design, 2001, 79(7):701-715
[16] Laleh T M, Yuan X, Luo Y, et al. Numerical investigation on effect of vapor split ratio to performance and operability for dividing wall column[J]. Chinese Journal of Chemical Engineering, 2013, 21(1):72-78
[17] Fidkowski Z, Krolikowski L. Thermally coupled system of distillation columns:Optimization procedure[J]. AIChE Journal, 1986, 32:537-546
[18] Ulrich G D. A guide to chemical engineering process design and economics[M]. Michigan:Wiley, 1984
[19] 吕向红, 路恩锡. 热耦蒸馏及其选用原则[J]. 化学工程, 2005, 33(2):9-12 Lv Xianghong, Lu Enxi. Thermally coupled distillation and its selection principles[J]. Chemical Engineering, 2005, 33(2):9-12(in Chinese)
[20] 龚超, 余爱平, 罗祎青, 等. 完全能量耦合精馏塔的设计、模拟与优化[J]. 化工学报, 2012, 63(1):177-184 Gong Chao, Yu Aiping, Luo Yiqing, et al. The design, simulation and optimization of fully thermally coupled distillation column[J]. Journal of Chemical Industry & Technology, 2012, 63(1):177-184(in Chinese)
[21] Halvorsen I J, Skogestad S. Minimum energy consumption in multicomponent distillation.1.Vmin diagram for a two-product column[J]. Industrial & Engineering Chemistry Research, 2003, 42(3):596-604
[22] Halvorsen I J, Skogestad S. Optimal operation of Petlyuk distillation:Steady-State behavior[J]. Journal of Process Control, 1999, 9:407-424
[23] Wolff E A, Skogestad S. Operation of integrated three-product (Petlyuk) distillation columns[J]. Industrial & Engineering Chemistry Research, 1995, 34(6):2094-2103
|