化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2011, Vol. 28 Issue (2) :63-67    DOI:
Article Current Issue | Next Issue | Archive | Adv Search << | >>
Synthesis of β-methylnaphthoquinone by Catalytic Oxidation of β-methylnaphthalene with WO3/HMS Catalyst
LI Dong��jun, YUE Li, LAI Shi��quan, LI Wen��jun, ZHANG Jia��da, WANG Rong��rong
School of Chemical Engineering, University of Science and Technology Liaoning, Anshan 114051,  China

Abstract
Reference
Related Articles
Download: PDF (212KB)   HTML 1KB   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract β-methylnaphthoquinone (β-MNQ) was synthesized by heterogeneous catalytic oxidation of β-methylnaphthalene (β-MN) with WO3/HMS as catalyst and hydrogen peroxide as oxidant in acetic acid (HAc). The catalyst of molecular sieve WO3/HMS was prepared with (NH4)2WO4 as tungsten source. The effect of process conditions such as reaction temperature, reaction time, loading content of WO3, catalyst usage and mass fraction of oxidant on the reaction were investigated. The experimental results showed that the optimum conditions of β-MNQ synthesized with β��MN over WO3/HMS catalyst were as follows: the reaction temperature was 353��K, the reaction time was 6��h, n(H2O2)/n(β-MN)=18:1, the amount of catalyst with n(Si)/n(W)=30 was 0.3 g/mL(based on HAc). Under these conditions, the selectivity and the yield of β-MNQ were up to 51.7% and 46.9%, respectively.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
LI Dong-Jun
YUE Li
LAI Shi-Quan
LI Wen-Jun
ZHANG Jia-Da
WANG Rong-Rong
Keywords�� WO3/HMS catalyst   β-methylnaphthalene   β-   catalytic oxidation     
Cite this article:   
LI Dong-Jun, YUE Li, LAI Shi-Quan, LI Wen-Jun, ZHANG Jia-Da, WANG Rong-Rong.Synthesis of β-methylnaphthoquinone by Catalytic Oxidation of β-methylnaphthalene with WO3/HMS Catalyst[J]  Chemcial Industry and Engineering, 2011,V28(2): 63-67
Copyright 2010 by Chemcial Industry and Engineering