[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2023, Vol. 40 Issue (1) :96-103    DOI: 10.13353/j.issn.1004.9533.20226005
研究论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
头孢拉定连续结晶工艺研究
解晨新1, 杜雪1, 苑梦洁1, 刘宝树1, 杨梦德2, 孙华1
1. 河北科技大学化学与制药工程学院, 石家庄 050018;
2. 华北制药河北华民药业有限责任公司, 石家庄 052160
Study on continuous crystallization of cefradine
XIE Chenxin1, DU Xue1, YUAN Mengjie1, LIU Baoshu1, YANG Mengde2, SUN Hua1
1. College of Chemical and Pharmaceutical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China;
2. NCPC Hebei Huamin Pharmaceutical Co., Ltd., Shijiazhuang 052165, China

摘要
参考文献
相关文章
Download: PDF (2917KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
文章导读  
摘要 采用三级混合悬浮混合产品出料结晶器(MSMPR),搭建了头孢拉定连续结晶实验装置。通过单因素实验研究了养晶pH值、晶种添加量、原料液浓度、停留时间、结晶系统温度及搅拌速率等结晶工艺条件对头孢拉定连续结晶产品收率及粒度分布的影响,优化了头孢拉定连续结晶工艺参数。通过实验获得优化结晶工艺参数:结晶温度293.15 K,搅拌速率180 r·min-1,养晶pH=2.85,晶种添加量为3%(质量分数),头孢拉定原料液浓度11%(质量分数),停留时间33.3 min,此条件下可以获得平均粒径为85.3 μm,收率为76.53%的头孢拉定连续结晶产品。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
解晨新
杜雪
苑梦洁
刘宝树
杨梦德
孙华
关键词头孢拉定   连续结晶   反应结晶   工艺优化     
Abstract: In this study, a three-stage mixed suspension mixed product discharge crystallizer (MSMPR) was used to conduct the continuous crystallization of cefradine. The effects of a series of crystallization conditions, such as crystallization point, seed addition amount, concentration of raw material liquid, the residence time, crystallization system temperature and stirring rate, on the yield and particle size distribution of cefradine were studied through single factor experiments. The continuous crystallization process parameters of cefradine were optimized. The optimized process parameters were obtained through experiment:the crystallization temperature was 293.15 K, the stirring rate was 180 r·min-1, the pH of crystallization point was 2.85, the seed addition amount was 3% (mass fraction), the concentration of cefradine liquid was 11% (mass fraction) and the residence time was 33.3 min. The continuous crystal product of cefradine was obtained with average particle size of 85.3 μm and yield of 76.53%.
Keywordscefradine   continuous crystallization   reactive crystallization   process optimization     
Received 2022-10-20;
Fund:河北省自然科学基金重点项目(B2020208095)。
Corresponding Authors: 孙华,教授,E-mail:sunhua@hebust.edu.cn;杨梦德,工程师,E-mail:yangmd2005@163.com。     Email: sunhua@hebust.edu.cn;yangmd2005@163.com
About author: 解晨新(1997-),女,硕士研究生,现从事药物结晶方面的研究。
引用本文:   
解晨新, 杜雪, 苑梦洁, 刘宝树, 杨梦德, 孙华.头孢拉定连续结晶工艺研究[J].  化学工业与工程, 2023,40(1): 96-103
XIE Chenxin, DU Xue, YUAN Mengjie, LIU Baoshu, YANG Mengde, SUN Hua.Study on continuous crystallization of cefradine[J].  Chemcial Industry and Engineering, 2023,40(1): 96-103
Copyright 2010 by 化学工业与工程