化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2011, Vol. 28 Issue (1) :39-39    DOI:
Article Current Issue | Next Issue | Archive | Adv Search << | >>
Separation of Catalytic Powder from FCC Slurry Oil by Solvent Extraction and Filtration
JIANG Zhao-kun, CAO Zu-bin��, ZHAO Rong-xiang, ZHU Yuan-bao, SONG Jia
School of Petrochemical Engineering, Liaoning Shihua University

Abstract
Reference
Related Articles
Download: PDF (143KB)   HTML 1KB   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract The utilization of Fluid Catalytic Cracking (FCC) slurry oil and the main purification technologies were introduced, and the furfural extraction and filtration technology for the separation of catalyst powder from FCC slurry oil was studied. The experimental results showed that over 95 percent of the catalyst powder could be removed by furfural extraction when the extraction temperature was 60 ��, the ratio of catalyst to oil was 2.5:1.0,and the residence time was 25 min.The remained 5 percent of the catalyst powder could be removed through filteration.The extracted oil would not be necessary to remove catalyst powder when it was used as stock feed of catalytic cracking, while the catalyst powder could be filtered due to its low viscosity when it was used as stock feed of catalytic hydrogenation or was for sale.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
JIANG Zhao-Kun
CAO Zu-Bin
ZHAO Rong-Xiang
ZHU Yuan-Bao
SONG Jia
Keywords�� solvent extraction   separation   slurry oil   catalyst powder     
Cite this article:   
JIANG Zhao-Kun, CAO Zu-Bin, ZHAO Rong-Xiang, ZHU Yuan-Bao, SONG Jia.Separation of Catalytic Powder from FCC Slurry Oil by Solvent Extraction and Filtration[J]  Chemcial Industry and Engineering, 2011,V28(1): 39-39
Copyright 2010 by Chemcial Industry and Engineering