[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2008, Vol. 25 Issue (3) :199-202    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
微位移法在物料总质量检测中的应用
王一平;郝朋越;李克健;黄群武;
天津大学化工学院,天津大学化工学院,煤炭科学研究总院北京煤化学所,天津大学化工学院 天津300072,天津300072,北京100013,天津300072
Application of Micro-Displacement Method in Total Material Mass Measurement
WANG Yi-ping~1,HAO Peng-yue~1,LI Ke-jian~2,HUANG Qun-wu~1(1.School of Chemical Engineering & Technology,Tianjin University,Tianjin 300072,China;2.Beijing Research Institute of Coal Chemistry,CCRI,Beijing 100013,China)
(1.School of Chemical Engineering & Technology,Tianjin University,Tianjin 300072,China;2.Beijing Research Institute of Coal Chemistry,CCRI,Beijing 100013,China

摘要
参考文献
相关文章
Download: PDF (218KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 为解决某些化工过程中物料总质量测量困难的问题,基于支架系统的载荷与变形线性关系,提出了一种利用微位移来测量的新方法。分别采用有限元分析和试验标定法对支撑鼓泡塔的悬挂系统进行检测,结果表明微位移的测量方法准确、可行。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
王一平
郝朋越
李克健
黄群武
关键词总质量测量   支架   微位移     
Abstract: In order to solve the measurement problem of total material mass in certain chemical processes,a novel method with the help of micro-displacement test was proposed based on the linear relationship of load and deformation.A suspension system which was used for supporting bubble column was taken as an example.The Finite Element Analysis and experiment method were applied respectively to validate the veracity of the micro-displacement method.And the results show that this measurement method is feasible.
Keywords:   
Received 2008-05-15; published 2008-05-15
引用本文:   
王一平;郝朋越;李克健;黄群武;.微位移法在物料总质量检测中的应用[J].  化学工业与工程, 2008,25(3): 199-202
WANG Yi-ping~1,HAO Peng-yue~1,LI Ke-jian~2,HUANG Qun-wu~1.Application of Micro-Displacement Method in Total Material Mass Measurement[J].  Chemcial Industry and Engineering, 2008,25(3): 199-202
Copyright 2010 by 化学工业与工程