[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2021, Vol. 38 Issue (4) :73-77    DOI: 10.13353/j.issn.1004.9533.20201003
能源与环境化工 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
硫酸改性核桃壳处理含Cr(Ⅵ)模拟废水研究
汤琪1, 赵红静2, 裴聪聪1, 冷雪1, 熊姚梦1, 覃珊1, 张瀚1
1. 重庆交通大学材料科学与工程学院 重庆 400074;
2. 重庆市生态环境监测中心 重庆 401147
Treatment of Cr(Ⅵ) Ion in Simulated Wastewater by Walnut Shell Modified by Sulfuric Acid
Tang Qi1, Zhao Hongjing2, Pei Congcong1, Leng Xue1, Xiong Yaomeng1, Qin Shan1, Zhang Han1
1. School of Materials Science and Engineering, Chongqing Jiaotong University, Chongqing 400074, China;
2. Ecological and Enviromenal Monitoring Center of Chongqing, Chongqing 401147, China

摘要
参考文献
相关文章
Download: PDF (1506KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 在100 mL 8 mol·L-1硫酸溶液中,核桃壳加入量为9 g,核桃壳颗粒度为100目,反应时间为3 h,反应温度为25 ℃的条件下制备得到硫酸改性核桃壳。硫酸改性核桃壳对Cr(Ⅵ)具有优异的吸附性能。详细探讨了硫酸改性核桃壳处理含Cr(Ⅵ)模拟废水的影响因素:废水pH值、Cr(Ⅵ)离子浓度、硫酸改性核桃壳用量、处理时间和处理温度等对Cr(Ⅵ)去除率的影响,并进一步通过正交试验及对比试验得出处理150 mL 200 mg·L-1的含Cr(Ⅵ)模拟废水的最适宜处理工艺为:pH值为1,硫酸改性核桃壳用量为1.4 g,处理时间为2 h,处理温度为25 ℃,在此条件下,对Cr(Ⅵ)的去除率达到95.86%,Cr(Ⅵ)吸附量为20.54 mg·g-1
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
汤琪
赵红静
裴聪聪
冷雪
熊姚梦
覃珊
张瀚
关键词硫酸改性核桃壳   Cr(Ⅵ)   处理工艺   去除率     
Abstract: Walnut shell modified by sulfuric acid was synthesized under the conditions that the volume of 8 mol·L-1 sulfuric acid solution is 100 mL, walnut shell dosage is 9 g, particle size of walnut shell is 80 mesh, reaction time is 3 h, reaction temperature is 25 ℃. Walnut shell modified by sulfuric acid has excellent adsorption property to Cr(Ⅵ) ion. Some factors,such as the dosage of walnut shell modified by sulfuric acid, Cr(Ⅵ) ion concentration, pH, treatment time, treatment temperature which affect the removal rate of Cr(Ⅵ) ion, were investigated. The dispose technics were more optimized through orthogonal experiment and comparative experiment. When the volume of Cr(Ⅵ) ion simulated wastewater is 150 mL, Cr(Ⅵ) ion concentration is 200 mg·L-1, the best dispose technics are as follows:pH=1, the dosage of walnut shell modified by sulfuric acid is 1.4 g, treatment time is 3 h, treatment temperature is 25 ℃. Under those conditions, the removal rate of Cr(Ⅵ) ion was 95.86% and the adsorption capacity of sorbent was 20.54 mg·g-1.
Keywordswalnut shell modified by sulfuric acid;   Cr(Ⅵ);   dispose technics;   removal rate     
Received 2020-10-19;
Fund:国家自然科学基金资助项目(21307168);重庆市自然科学基金资助项目(cstcjjA50016);重庆交通大学大创项目(X202010618076)。
Corresponding Authors: 汤琪,E-mail:83723885@qq.com。     Email: 83723885@qq.com
About author: 汤琪(1970-),男,副教授,博士,主要从事环境材料技术研究。
引用本文:   
汤琪, 赵红静, 裴聪聪, 冷雪, 熊姚梦, 覃珊, 张瀚.硫酸改性核桃壳处理含Cr(Ⅵ)模拟废水研究[J].  化学工业与工程, 2021,38(4): 73-77
Tang Qi, Zhao Hongjing, Pei Congcong, Leng Xue, Xiong Yaomeng, Qin Shan, Zhang Han.Treatment of Cr(Ⅵ) Ion in Simulated Wastewater by Walnut Shell Modified by Sulfuric Acid[J].  Chemcial Industry and Engineering, 2021,38(4): 73-77
Copyright 2010 by 化学工业与工程