[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2013, Vol. 30 Issue (2) :70-74    DOI:
过程与设备 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
用于燃烧的富氧工艺
张大猛,解利昕
天津大学化工学院,天津市膜科学与海水淡化技术重点实验室
An Oxygen Enrichment Process for Oxyfuel Combustion
 ZHANG  Da-Meng, JIE  Li-Xin
School of Chemical Engineering and Technology, Tianjin University;Tianjin Key Laboratory of Membrane Science and Desalination Technology

摘要
参考文献
相关文章
Download: PDF (1764KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 利用热天平研究了煤在不同的氧气浓度条件下的燃烧行为,利用中空纤维膜组件进行了氧气富集试验,研究了操作工况对富氧空气通量和氧气浓度的影响。结果表明随着氧气浓度的增加,煤的着火温度及燃烬温度提前,燃烧速度增大,富氧空气的体积分数为30%左右较为合适。用于燃烧的富氧工艺的温度为20 ℃,压力为0.9 MPa,回收率应控制在90%左右。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
张大猛
解利昕
关键词中空纤维膜   富氧   燃烧     
Abstract: Combustion was characterized under various oxygen concentrations by using the thermogravimetric analyzer. The relationships between the flux of oxygen enrichment gas, the concentration of oxygen enrichment gas and operating conditions was experimentally studied by using the hollow fiber membrane module. The result showed that the increase of the oxygen concentration was able to reduce ignition temperature, the burnout temperature decreased when the increasing of concentration of oxygen enrichment gas; the rate of reaction increased when the concentration of oxygen enrichment gas increased; the most suitable concentration of oxygen enrichment gas was 30%. The suitable oxygen enrichment process for oxyfuel combustion is recommend to be operated under temperature of 20 ℃, pressure of 0.9 MPa, and the recovery should be controlled around 90%.
Keywordshollow fiber membrane   oxygen enrichment   combustion     
Received 2012-04-18;
Corresponding Authors: 张大猛,电话:13920569525,E-mail: tjuzdm@tju.edu.cn。     Email: tjuzdm@tju.edu.cn
About author: 张大猛(1985-),男,研究生,现从事膜分离方面的研究。
引用本文:   
张大猛, 解利昕.用于燃烧的富氧工艺[J].  化学工业与工程, 2013,30(2): 70-74
ZHANG Da-Meng, JIE Li-Xin.An Oxygen Enrichment Process for Oxyfuel Combustion[J].  Chemcial Industry and Engineering, 2013,30(2): 70-74
Copyright 2010 by 化学工业与工程