二维射流床空隙率分布

摘要使用ＰＣ－４光导纤维测浓仪测定了二维射流床中的空隙率分布，并考查了静床高、射流管径对空隙率分布的影响，发现在射流喷口上方２．５ｃｍ～７．５ｃｍ处有一最大空隙率分布区。利用空隙率分布可定义并求出射流深度，其值与Ｙａｎｇ的关联式计算值吻合。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	郭庆杰
	张济宇
	罗国华

关键词：空隙率分布静床高射流管径射流深度

Abstract： Porosity distribution was measured in a two-dimensional fluidized bed with a jet by PC-4 fiber optic probe.There was a region of maximum porosity at a level 2.5cm～7. 5cm above jet inlet. Expeiments proved that static height and nozzle diameter had some effects on porosity distribution. Based on voidage distribution, the penetration depth was defined and calcutated, and the results accorded with the penetration depth from the Yang's correlation.

Keywords： s: porosity distribution static bed height nozzle diameter penetration depth

Received 1996-10-15;

引用本文:

郭庆杰，张济宇，罗国华.二维射流床空隙率分布[J]. 化学工业与工程, 1996,13(4): 14-19

Guo Qingjie; Zhang Jiyu; Luo Guohua.Porosity Distribution in Two-dimensional Fludized Bed with a Jet[J]. Chemcial Industry and Engineering, 1996,13(4): 14-19