[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2009, Vol. 26 Issue (5) :400-403    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
耐火材料用有机-无机复合结合剂的研制
段辉;郑化;朱效津;
武汉科技大学材料与冶金学院;
Fabrication of Organic-Inorganic Composite Adhesives Used for Refractories
DUAN Hui,ZHENG Hua,ZHU Xiao-jin(College of Materials Science and Metallurgical Engineering,Wuhan University of Science and Technology,Wuhan 430081,Hubei Province,China)
(College of Materials Science and Metallurgical Engineering,Wuhan University of Science and Technology,Wuhan 430081,Hubei Province,China

摘要
参考文献
相关文章
Download: PDF (181KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 以水泥为结合剂的浇注料中含有CaO,在烧成过程中能够生成低共熔相而影响了其高温性能。为了提高浇注料的高温使用性能,需要在保证浇注料具有一定的常温强度的基础上,研制低水泥或者无水泥的新型结合剂来替代水泥结合剂。以丙烯酰胺体系为基础,探讨了丙烯酰胺系有机-无机结合剂在矾土基浇注料中的实际使用效果。结果表明,浇注料在110℃烘干后的体积密度、显气孔率、耐压和抗折强度等常温性能良好,尤其是抗折强度得到很大的提高。在不同高温烧成后,有机结合剂的浇注料性能得到提高。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
段辉
郑化
朱效津
关键词无水泥浇注料   溶胶-凝胶法   有机-无机复合结合剂     
Abstract: Because CaO contained in the cement castable can generate the low total melting,the properties of cement castables at high temperature can be weakened.Therefore,we need to develop a new binder to replace cement to improve the properties at high temperature,as well as at room temperature.Based on acrylamide gel system a new type of binder for castables was developed by adding micropowder.It was concluded that after drying at(110 ℃,) the castable showed good properties such as the bulk density,apparent porosity,cold crushing strength and bending strength,especially bending strength was improved largely.Through sintering at high temperature,better properties of the castable was obtained.
Keywords:   
Received 2009-09-15; published 2009-09-15
引用本文:   
段辉;郑化;朱效津;.耐火材料用有机-无机复合结合剂的研制[J].  化学工业与工程, 2009,26(5): 400-403
DUAN Hui,ZHENG Hua,ZHU Xiao-jin.Fabrication of Organic-Inorganic Composite Adhesives Used for Refractories[J].  Chemcial Industry and Engineering, 2009,26(5): 400-403
Copyright 2010 by 化学工业与工程