[1] Yuan Y, Han M, Wang L, et al. Mass transfer coefficient for two-phase countercurrent flow in a packed column with a novel internal[J]. Chemical Engineering Journal, 2004, 99(3):273-277
[2] Wibisono Y, Cornelissen E R, Kemperman A J B, et al. Two-phase flow in membrane processes:A technology with a future[J]. Journal of Membrane Science, 2014, 453:566-602
[3] Li X, Wei T, Wang D, et al. Study of gas-liquid two-phase flow patterns of self-excited dust scrubbers[J]. Chemical Engineering Science, 2016, 151:79-92
[4] Dries H W, Hoffmann A C. A correlation giving improved description of the capacity and efficiency of vane-type gas-liquid separators[J]. AIChE Journal, 2019, doi:10.1002/aic.16566
[5] Iliuta I, Iliuta M C. Modeling of SO2 seawater scrubbing in countercurrent packed-bed columns with high performance packings[J]. Separation and Purification Technology, 2019, 226:162-180
[6] Bauer T, Schubert M, Lange R. Prozessintensivierung heterogen katalysierter gas/flüssig-reaktionen mit monolithreaktoren[J]. Chemie Ingenieur Technik, 2005, 77(11):1683-1692
[7] Zheng Z, Chen Y, Zhan X, et al. Mass transfer intensification in a novel airlift reactor assembly with helical sieve plates[J]. Chemical Engineering Journal, 2018, 342:61-70
[8] Han S, Kashfipour M A, Ramezani M, et al. Accelerating gas-liquid chemical reactions in flow[J]. Chemical Communications, 2020, 56(73):10593-10606
[9] Chang Y, Xu L, Li J, et al. Gas-liquid swirling-sparger configured along a toroidal distributor for the intensification of gas-liquid contacting[J]. Industrial & Engineering Chemistry Research, 2021, 60(3):1423-1433
[10] 陈光文, 赵玉潮, 乐军, 等. 微化工过程中的传递现象[J]. 化工学报, 2013, 64(1):63-75 Chen Guangwen, Zhao Yuchao, Yue Jun, et al. Transport phenomena in micro-chemical engineering[J]. CIESC Journal, 2013, 64(1):63-75(in Chinese)
[11] Plouffe P, Bittel M, Sieber J, et al. On the scale-up of micro-reactors for liquid-liquid reactions[J]. Chemical Engineering Science, 2016, 143:216-225
[12] Sattari-Najafabadi M, Nasr Esfahany M, Wu Z, et al. The effect of the size of square microchannels on hydrodynamics and mass transfer during liquid-liquid slug flow[J]. AIChE Journal, 2017, 63(11):5019-5028
[13] Kashid M N, Gupta A, Renken A, et al. Numbering-up and mass transfer studies of liquid-liquid two-phase microstructured reactors[J]. Chemical Engineering Journal, 2010, 158(2):233-240
[14] Liu Y, Yue J, Xu C, et al. Hydrodynamics and local mass transfer characterization under gas-liquid-liquid slug flow in a rectangular microchannel[J]. AIChE Journal, 2020, doi:10.1002/aic.16805
[15] Yao C, Zhao Y, Zheng J, et al. The effect of liquid viscosity and modeling of mass transfer in gas-liquid slug flow in a rectangular microchannel[J]. AIChE Journal, 2020, doi:10.1002/aic.16934
[16] Zhang T, Cao B, Fan Y, et al. Gas-liquid flow in circular microchannel. Part I:Influence of liquid physical properties and channel diameter on flow patterns[J]. Chemical Engineering Science, 2011, 66(23):5791-5803
[17] Bordbar A, Taassob A, Zarnaghsh A, et al. Slug flow in microchannels:Numerical simulation and applications[J]. Journal of Industrial and Engineering Chemistry, 2018, 62:26-39
[18] Yin Y, Zhu C, Guo R, et al. Gas-liquid two-phase flow in a square microchannel with chemical mass transfer:Flow pattern, void fraction and frictional pressure drop[J]. International Journal of Heat and Mass Transfer, 2018, 127:484-496
[19] Fu T, Ma Y. Bubble formation and breakup dynamics in microfluidic devices:A review[J]. Chemical Engineering Science, 2015, 135:343-372
[20] Triplett K A, Ghiaasiaan S M, Abdel-Khalik S I, et al. Gas-liquid two-phase flow in microchannels Part I:Two-phase flow patterns[J]. International Journal of Multiphase Flow, 1999, 25(3):377-394
[21] Akbar M K, Plummer D A, Ghiaasiaan S M. On gas-liquid two-phase flow regimes in microchannels[J]. International Journal of Multiphase Flow, 2003, 29(5):855-865
[22] Yue J, Luo L, Gonthier Y, et al. An experimental investigation of gas-liquid two-phase flow in single microchannel contactors[J]. Chemical Engineering Science, 2008, 63(16):4189-4202
[23] Wang X, Yong Y, Fan P, et al. Flow regime transition for cocurrent gas-liquid flow in micro-channels[J]. Chemical Engineering Science, 2012, 69(1):578-586
[24] Dang M, Yue J, Chen G. Numerical simulation of Taylor bubble formation in a microchannel with a converging shape mixing junction[J]. Chemical Engineering Journal, 2015, 262:616-627
[25] 谭璟, 赵菁菁, 徐建鸿, 等. 微通道中气体/离子液体两相流动与分散性能[J]. 化工学报, 2014, 65(1):55-60 Tan Jing, Zhao Jingjing, Xu Jianhong, et al. Flow and dispersion performance of gas/ionic liquid systems in microchannels[J]. CIESC Journal, 2014, 65(1):55-60(in Chinese)
[26] Yang L, Tan J, Wang K, et al. Mass transfer characteristics of bubbly flow in microchannels[J]. Chemical Engineering Science, 2014, 109:306-314
[27] Pennemann H, Hessel V, Kost H J, et al. Investigations on pulse broadening for catalyst screening in gas/liquid systems[J]. AIChE Journal, 2004, 50(8):1814-1823
[28] 尧超群, 乐军, 赵玉潮, 等. 微通道内气-液弹状流动及传质特性研究进展[J]. 化工学报, 2015, 66(8):2759-2766 Yao Chaoqun, Yue Jun, Zhao Yuchao, et al. Review on flow and mass transfer characteristics of gas-liquid slug flow in microchannels[J]. CIESC Journal, 2015, 66(8):2759-2766(in Chinese)
[29] Yao C, Dong Z, Zhao Y, et al. An online method to measure mass transfer of slug flow in a microchannel[J]. Chemical Engineering Science, 2014, 112:15-24
[30] Yao C, Dong Z, Zhang Y, et al. On the leakage flow around gas bubbles in slug flow in a microchannel[J]. AIChE Journal, 2015, 61(11):3964-3972
[31] Jia H, Zhang P. Investigation of the Taylor bubble under the effect of dissolution in microchannel[J]. Chemical Engineering Journal, 2016, 285:252-263
[32] Ye C, Chen G, Yuan Q. Process characteristics of CO2 absorption by aqueous monoethanolamine in a microchannel reactor[J]. Chinese Journal of Chemical Engineering, 2012, 20(1):111-119
[33] Guo R, Zhu C, Yin Y, et al. Mass transfer characteristics of CO2 absorption into 2-amino-2-methyl-1-propanol non-aqueous solution in a microchannel[J]. Journal of Industrial and Engineering Chemistry, 2019, 75:194-201
[34] Yue J, Chen G, Yuan Q, et al. Hydrodynamics and mass transfer characteristics in gas-liquid flow through a rectangular microchannel[J]. Chemical Engineering Science, 2007, 62(7):2096-2108
[35] Sobieszuk P, Pohorecki R, Cygański P, et al. Determination of the interfacial area and mass transfer coefficients in the Taylor gas-liquid flow in a microchannel[J]. Chemical Engineering Science, 2011, 66(23):6048-6056
[36] Ganapathy H, Shooshtari A, Dessiatoun S, et al. Hydrodynamics and mass transfer performance of a microreactor for enhanced gas separation processes[J]. Chemical Engineering Journal, 2015, 266:258-270
[37] Bercic G, Pintar A. The role of gas bubbles and liquid slug lengths on mass transport in the Taylor flow through capillaries[J]. Chemical Engineering Science, 1997, 52(21/22):3709-3719
[38] van Baten J M, Krishna R. CFD simulations of mass transfer from Taylor bubbles rising in circular capillaries[J]. Chemical Engineering Science, 2004, 59(12):2535-2545
[39] Jepsen J C. Mass transfer in two-phase flow in horizontal pipelines[J]. AIChE Journal, 1970, 16(5):705-711
[40] Ji X, Ma Y, Fu T, et al. Experimental investigation of the liquid volumetric mass transfer coefficient for upward gas-liquid two-phase flow in rectangular microchannels[J]. Brazilian Journal of Chemical Engineering, 2010, 27(4):573-582
[41] Niu H, Pan L, Su H, et al. Flow pattern, pressure drop, and mass transfer in a gas-liquid concurrent two-phase flow microchannel reactor[J]. Industrial & Engineering Chemistry Research, 2009, 48(3):1621-1628
[42] Kockmann N, Roberge D M. Scale-up concept for modular microstructured reactors based on mixing, heat transfer, and reactor safety[J]. Chemical Engineering and Processing:Process Intensification, 2011, 50(10):1017-1026
[43] Adamo A, Beingessner R L, Behnam M, et al. On-demand continuous-flow production of pharmaceuticals in a compact, reconfigurable system[J]. Science, 2016, 352(6281):61-67
[44] Bédard A C, Adamo A, Aroh K C, et al. Reconfigurable system for automated optimization of diverse chemical reactions[J]. Science, 2018, 361(6408):1220-1225
[45] 辛靖, 朱元宝, 胡淼, 等. 微化工技术的研究与应用进展[J]. 石油化工高等学校学报, 2020, 33(5):8-13 Xin Jing, Zhu Yuanbao, Hu Miao, et al. Research and application progress of microchemical technology[J]. Journal of Petrochemical Universities, 2020, 33(5):8-13(in Chinese)
[46] Su Y, Kuijpers K, Hessel V, et al. A convenient numbering-up strategy for the scale-up of gas-liquid photoredox catalysis in flow[J]. Reaction Chemistry & Engineering, 2016, 1(1):73-81
[47] Wada Y, Schmidt M A, Jensen K F. Flow distribution and ozonolysis in gas-liquid multichannel microreactors[J]. Industrial & Engineering Chemistry Research, 2006, 45(24):8036-8042
[48] Ahn G N, Yu T, Lee H J, et al. A numbering-up metal microreactor for the high-throughput production of a commercial drug by copper catalysis[J]. Lab on a Chip, 2019, 19(20):3535-3542
[49] Kuijpers K P L, van Dijk M A H, Rumeur Q G, et al. A sensitivity analysis of a numbered-up photomicroreactor system[J]. Reaction Chemistry & Engineering, 2017, 2(2):109-115
[50] Chein R, Chen J. Numerical study of the inlet/outlet arrangement effect on microchannel heat sink performance[J]. International Journal of Thermal Sciences, 2009, 48(8):1627-1638
[51] Manoj S V, Pattamatta A, Das S K. Investigation on flow maldistribution in parallel microchannel systems for integrated microelectronic device cooling[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2014, 4(3):438-450
[52] Xia G, Jiang J, Wang J, et al. Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks[J]. International Journal of Heat and Mass Transfer, 2015, 80:439-447
[53] Amador C, Gavriilidis A, Angeli P. Flow distribution in different microreactor scale-out geometries and the effect of manufacturing tolerances and channel blockage[J]. Chemical Engineering Journal, 2004, 101(1/2/3):379-390
[54] Kwak Y, Pence D, Liburdy J, et al. Gas-liquid flows in a microscale fractal-like branching flow network[J]. International Journal of Heat and Fluid Flow, 2009, 30(5):868-876
[55] Tondeur D, Luo L. Design and scaling laws of ramified fluid distributors by the constructal approach[J]. Chemical Engineering Science, 2004, 59(8/9):1799-1813
[56] Lorente S, Wechsatol W, Bejan A. Optimization of tree-shaped flow distribution structures over a disc-shaped area[J]. International Journal of Energy Research, 2003, 27(8):715-723
[57] Lewins J. Bejan's constructal theory of equal potential distribution[J]. International Journal of Heat and Mass Transfer, 2003, 46(9):1541-1543
[58] Wechsatol W, Lorente S, Bejan A. Tree-shaped networks with loops[J]. International Journal of Heat and Mass Transfer, 2005, 48(3/4):573-583
[59] Fan Z, Zhou X, Luo L, et al. Experimental investigation of the flow distribution of a 2-dimensional constructal distributor[J]. Experimental Thermal and Fluid Science, 2008, 33(1):77-83
[60] Hoang D A, Haringa C, Portela L M, et al. Design and characterization of bubble-splitting distributor for scaled-out multiphase microreactors[J]. Chemical Engineering Journal, 2014, 236:545-554
[61] Chung P M Y, Kawaji M. The effect of channel diameter on adiabatic two-phase flow characteristics in microchannels[J]. International Journal of Multiphase Flow, 2004, 30(7/8):735-761
[62] Xu J, Feng Y, Cen J. Transient flow patterns and bubble slug lengths in parallel microchannels with oxygen gas bubbles produced by catalytic chemical reactions[J]. International Journal of Heat and Mass Transfer, 2007, 50(5/6):857-871
[63] Zhang L, Peng D, Lyu W, et al. Uniformity of gas and liquid two phases flowing through two microchannels in parallel[J]. Chemical Engineering Journal, 2015, 263:452-460
[64] Guo R, Fu T, Zhu C, et al. The effect of flow distribution on mass transfer of gas-liquid two-phase flow in two parallelized microchannels in a microfluidic loop[J]. International Journal of Heat and Mass Transfer, 2019, 130:266-273
[65] Yue J, Boichot R, Luo L, et al. Flow distribution and mass transfer in a parallel microchannel contactor integrated with constructal distributors[J]. AIChE Journal, 2010, 56(2):298-317
[66] Wang L, Wu W, Li X. Numerical and experimental investigation of mixing characteristics in the constructal tree-shaped microchannel[J]. International Journal of Heat and Mass Transfer, 2013, 67:1014-1023
[67] Guo R, Fu T, Zhu C, et al. Hydrodynamics and mass transfer of gas-liquid flow in a tree-shaped parallel microchannel with T-type bifurcations[J]. Chemical Engineering Journal, 2019, 373:1203-1211
[68] Liu H, Li P. Even distribution/dividing of single-phase fluids by symmetric bifurcation of flow channels[J]. International Journal of Heat and Fluid Flow, 2013, 40:165-179
[69] Wang X, Mujumdar A S, Yap C. Effect of bifurcation angle in tree-shaped microchannel networks[J]. Journal of Applied Physics, 2007, doi:10.1063/1.2794379
[70] Liu H, Li P, Lew J V, et al. Experimental study of the flow distribution uniformity in flow distributors having novel flow channel bifurcation structures[J]. Experimental Thermal and Fluid Science, 2012, 37:142-153
[71] Sun W, Liu Y, He K, et al. The phase distribution of gas-liquid two-phase flow in microimpacting T-junctions with different branch channel diameters[J]. Chemical Engineering Journal, 2018, 333:34-42
[72] Guo R, Fu T, Zhu C, et al. Flow distribution and mass transfer of gas-liquid flow in parallel microchannels with different tree-shaped distributors:Halving-width versus constant-width[J]. Industrial & Engineering Chemistry Research, 2020, 59(3):1327-1335
[73] Guo R, Fu T, Zhu C, et al. Pressure drop model of gas-liquid flow with mass transfer in tree-typed microchannels[J]. Chemical Engineering Journal, 2020, doi:10.1016/j.icheatmasstransfer.2011.08.020
[74] Choi W, Hashimoto M, Ellerbee A K, et al. Bubbles navigating through networks of microchannels[J]. Lab on a Chip, 2011, 11(23):3970-3978
[75] Pistoresi C, Fan Y, Luo L. Numerical study on the improvement of flow distribution uniformity among parallel mini-channels[J]. Chemical Engineering and Processing:Process Intensification, 2015, 95:63-71
[76] Commenge J M, Falk L, Corriou J P, et al. Optimal design for flow uniformity in microchannel reactors[J]. AIChE Journal, 2002, 48(2):345-358
[77] Delsman E R, Pierik A, de Croon M H J M, et al. Microchannel plate geometry optimization for even flow distribution at high flow rates[J]. Chemical Engineering Research and Design, 2004, 82(2):267-273
[78] Anbumeenakshi C, Thansekhar M R. Experimental investigation of header shape and inlet configuration on flow maldistribution in microchannel[J]. Experimental Thermal and Fluid Science, 2016, 75:156-161
[79] Zoljalali M A, Omidbakhsh A E. Study of the flow distribution in parallel micro-channels with a triangular manifold[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 42(1):1-9
[80] Kumaraguruparan G, Kumaran R M, Sornakumar T, et al. A numerical and experimental investigation of flow maldistribution in a micro-channel heat sink[J]. International Communications in Heat and Mass Transfer, 2011, 38(10):1349-1353
[81] Kumaran R M, Kumaraguruparan G, Sornakumar T. Experimental and numerical studies of header design and inlet/outlet configurations on flow mal-distribution in parallel micro-channels[J]. Applied Thermal Engineering, 2013, 58(1/2):205-216
[82] Liu Y, Wang S. Distribution of gas-liquid two-phase slug flow in parallel micro-channels with different branch spacing[J]. International Journal of Heat and Mass Transfer, 2019, 132:606-617
[83] Liu Y, Sun W, Wu W, et al. Gas-liquid two-phase flow distribution in parallel micro-channels with different header and channels' orientations[J]. International Journal of Heat and Mass Transfer, 2017, 112:767-778
[84] Liu Y, Sun W, Wang S. Experimental investigation of two-phase slug flow distribution in horizontal multi-parallel micro-channels[J]. Chemical Engineering Science, 2017, 158:267-276
[85] Al-Rawashdeh M, Fluitsma L J M, Nijhuis T A, et al. Design criteria for a barrier-based gas-liquid flow distributor for parallel microchannels[J]. Chemical Engineering Journal, 2012, 181/182:549-556
[86] Madane K, Kulkarni A A. Pressure equalization approach for flow uniformity in microreactor with parallel channels[J]. Chemical Engineering Science, 2018, 176:96-106
[87] Saber M, Commenge J M, Falk L. Microreactor numbering-up in multi-scale networks for industrial-scale applications:Impact of flow maldistribution on the reactor performances[J]. Chemical Engineering Science, 2010, 65(1):372-379
|
2021, Vol. 38 
