垂直管内气液两相流的探讨—

摘要本文把空隙率和气相密度沿管子高度的变化当作连续过程，并从微分总压力降出发，然后在全管范围内积分，从而导出气液两相在气泡流情况下的总压力降模型为Ｐ１－Ｐ２＝ｄ－ｂｃａｃｌｎｄ＋ａｃＰ１ｄ＋ａｃＰ２＋Ｚｃ该模型用于求垂直管内向上流动的气泡流压力降时初值要求不高，收敛快，且准确度高。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	郑成

关键词：垂直管气液两相流压力降弹状流

Abstract： Based on the pressure drop of differential element and integration for the whole region, an equation for calculating the total pressure drop of gas—liquid two—phase bubble flow was derived as followsP 1-P 2=d-bcac ln (1+d+acP 1d+acP 2)+ZcIn doing this, the variation in voidage and gas density along the pipe were considered to be continuous. This model has the advantages of simpler calculation and higher accuracy when it is used to calculate the pressure drop of bubble flow in vertical pipe.

Keywords： vertical pipe gas-liquid two phase flow pressure drop bubble flow

Received 1997-10-15;

引用本文:

郑成.垂直管内气液两相流的探讨——气泡流压力降[J]. 化学工业与工程, 1997,14(4): 18-22

Zheng Cheng .Study on the Pressure Drop of Gas—Liquid Two—Phase Bubble Flow in Vertical Pipe[J]. Chemcial Industry and Engineering, 1997,14(4): 18-22