MoS_2/C Catalyst for One-Step Synthesis of Ethyl Acetate from Ethanol

Related Articles

Abstract A new MoS_2/C catalyst for one-step synthesis of ethyl acetate from ethanol was proposed.The effects of ATTM loading quantity on the performance of MoS_2/C catalyst were investigated and the results indicated that when the best loading quantity was 20%,the ethanol coversion was 88%,the acetate selectivity was 48%,the combined selectivity of ethyl acetate and aldehyde was 85%.The higher loading would decrease ethanol conversion and ethyl acetate selectivity.The preliminary mechanism was proposed based on the experiment,the proposed reaction mechanism was that ethyl acetate was produced via dehydrogenation of ethanol and acetaldehyde.

	Service

	Email this article
	Add to my bookshelf
	Add to citation manager
	Email Alert
	RSS
	Articles by authors

Keywords��

Received 2006-09-15; published 2006-09-15

Cite this article:

CUI Neng-wei,LIU Cheng,JIANG Hao-xi,ZHANG Min-hua.MoS_2/C Catalyst for One-Step Synthesis of Ethyl Acetate from Ethanol[J] Chemcial Industry and Engineering, 2006,V23(5): 400-402

[1]	�󾰺�,��,Ӻ��.�Ҵ��߻��ķ�Ӧ��[J].��ϸ��,1995,12(6):25-30.
[2]	��ΰ��.�Ҵ��绯��һ��ϳ��[J].ʯ�ͻ��,1991,20(5):330-337.
[3]	KANICHIRO INUI,TORU KURABAYASHI,SATOSHISATO.Direct synthesis of ethyl acetate from ethanol carriedout under pressure[J].[J].Journal of Catalysis.2005,212:207-
[4]	KANICHIRO INUI,TORU KURABAYASHI,SATOSHISATO.Effective formation of ethyl acetate from ethanol overCu-Zn-Zr-Al-O catalyst[J].Applied Catalysis A:General.2002,237:53-61
[5]	KANICHIRO INUI,TORU KURABAYASHI,SATOSHISATO,et al.Effective formation of ethyl acetate fromethanol over Cu-Zn-Zr-Al-O catalyst[J].Journal ofMolecular Catalysis A:Chemical,2004,216:147-156.