化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2010, Vol. 27 Issue (4) :317-322    DOI:
Article Current Issue | Next Issue | Archive | Adv Search << | >>
Preparation of Resin Injection Molding Catalyst for Hydration of Isobutylene
LIU Wen-fei1,2,WANG Jin-ming1,2,BI Xiao-hong3(1.Resin Catalyst Technology Center of Hebei Province,Cangzhou 061000,China;2.Kerry Chemical Co.Ltd.,Cangzhou 061000,China;3.Cangzhou Dahua Group Co.,Ltd.Cangzhou 061000,China)
(1.Resin Catalyst Technology Center of Hebei Province,Cangzhou 061000,China;2.Kerry Chemical Co.Ltd.,Cangzhou 061000,China;3.Cangzhou Dahua Group Co.,Ltd.Cangzhou 061000,China

Abstract
Reference
Related Articles
Download: PDF (255KB)   HTML 1KB   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract A kind of resin was developed with unqualified white ball as raw material.After being dewaxed and crushed into power,firstly mixed with stearic acid at 8�� 2,then mixed with 9�� 1 polystyrene(PS) and three-block styrene-butadiene rubber(SBS),the mixture was injected into a certain shape,then stearic acid was abstracted by acetone or ethanol to obtain resin with high porosity.After sulfonation and hanging files of the cationic catalyst production process,the strong acid resin catalyst was prepared with a specific shape,easy to load and low cost.It can be used in the hydration of isobutylene and show good conversion rate which close to or beyond the domestic commercial product of the same kind.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
Keywords��   
Received 2010-07-15; published 2010-07-15
Cite this article:   
LIU Wen-fei1,2,WANG Jin-ming1,2,BI Xiao-hong3.Preparation of Resin Injection Molding Catalyst for Hydration of Isobutylene[J]  Chemcial Industry and Engineering, 2010,V27(4): 317-322
Copyright 2010 by Chemcial Industry and Engineering