化学工业与工程
Home  |   |  About Journal  |  Editorial Board  |  Instruction  |  Subscriptions  |  Download  |  Publication Ethics  |  Contacts Us  |  Chinese
Chemcial Industry and Engineering 2011, Vol. 28 Issue (1) :17-17    DOI:
Article Current Issue | Next Issue | Archive | Adv Search << | >>
Claw Type Macromolecule of CDC-SO
CHEN Ling-ling, LONG Xiao-zhu, GAO Jin-peng, WANG Chang-song, GUO Wa-li, ZONG Xue-jun
Shenyang University of Chemical Technology

Abstract
Reference
Related Articles
Download: PDF (317KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract With the diethylene glycol, citric acid, stearic acid and octadecyl alcohol as raw materials, using the esterification, a new low-temperature flow improver, citric acid-diethylene glycol-citric acid-stearic acid-octadecyl alcohol(CDC-SO),was synthesized. Through the single factor and orthogonal experiments, the suitable conditions for preparing CDC-SO were obtained: The mole ratio of CDC to stearic acid was 1∶1.00, the mole ratio of CDC-S to octadecyl alcohol was 1∶4.0, the dosage of the catalyst was 1.00% based on the total mass of acid and alcohol of the total raw materials, the dosage of the solvent was 35% based on the total mass of acid and alcohol of the total raw materials, the time of the esterification reaction was 8 h. When CDC-SO was added with the dosage of 2.5 mg/g, in 0# diesel oil which was produced by the Shenyang Paraffin Wax Chemical Corporation, the cold filter plugging point could drop 5 ℃.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
CHEN Ling-Ling
LONG Xiao-Zhu
GAO Jin-Peng
WANG Chang-Song
GUO Wa-Li
ZONG Xue-Jun
Keywordsdiethyleneglycol   citric acid   claw macromolecule   low-temperate flow improver   diesel fuel     
Cite this article:   
CHEN Ling-Ling, LONG Xiao-Zhu, GAO Jin-Peng, WANG Chang-Song, GUO Wa-Li, ZONG Xue-Jun.Claw Type Macromolecule of CDC-SO[J]  Chemcial Industry and Engineering, 2011,V28(1): 17-17
Copyright 2010 by Chemcial Industry and Engineering