[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2004, Vol. 21 Issue (3) :174-176    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
碳酸二甲酯与苯酚酯交换合成碳酸二苯酯研究
潘发勇,王胜平,马新宾,李振花,许根慧
天津大学化工学院,天津大学化工学院,天津大学化工学院,天津大学化工学院,天津大学化工学院 天津300072 ,天津300072 ,天津300072 ,天津300072 ,天津300072
Synthesis of Diphenyl Carbonate by Transesterification of Dimethyl Carbonate with Phenol
PAN Fa-yong,WANG Sheng-ping,MA Xin-bin,LI Zhen-hua,XU Gen-hui (School of Chemical Engineering,Tianjin University,Tianjin 300072,China)
(School of Chemical Engineering,Tianjin University,Tianjin 300072,China

摘要
参考文献
相关文章
Download: PDF (0KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 选择Lewis酸催化剂、分子筛催化剂、有机钛和锡化合物催化剂和不同负载型金属氧化物催化剂用于碳酸二甲酯(DMC)与苯酚酯交换合成碳酸二苯酯(DPC)的过程。试验结果表明,MoO3 SiO2和TiO2 SiO2催化剂对该反应具有相对较好的催化活性和选择性。以MoO3 SiO2为催化剂,DMC转化率和DPC选择性分别为24 3%和37 6%;以TiO2 SiO2为催化剂,DMC转化率和DPC选择性分别为13 7%和20 0%。在该酯交换反应中,SiO2与Al2O3和MgO相比,是一种良好的催化剂载体。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
潘发勇
王胜平
马新宾
李振花
许根慧
关键词碳酸二甲酯   碳酸二苯酯   酯交换   MoO3SiO2   TiO2SiO2     
Abstract: Various kinds of catalysts,including Lewis acid,molecular sieve,organic Ti and Sn compounds, and supported metal oxide catalysts,were employed to catalyze the transesterification of dimethyl carbonate(DMC) with phenol to produce diphenyl carbonate(DPC). The results indicated that MoO_3/SiO_2,TiO_2/SiO_2 showed preferable activity and selectivity. The conversion of DMC and selectivity of products DPC were 24.3% and 37.6% respectively over MoO_3/SiO_2, while 13.7% and 20.0% over TiO_2/SiO_2. In this reaction, SiO_2, compared with Al_2O_3 and MgO, was an excellent carrier of catalyst.
Keywords:   
Received 2004-05-15; published 2004-05-15
引用本文:   
潘发勇,王胜平,马新宾,李振花,许根慧.碳酸二甲酯与苯酚酯交换合成碳酸二苯酯研究[J].  化学工业与工程, 2004,21(3): 174-176
PAN Fa-yong,WANG Sheng-ping,MA Xin-bin,LI Zhen-hua,XU Gen-hui .Synthesis of Diphenyl Carbonate by Transesterification of Dimethyl Carbonate with Phenol[J].  Chemcial Industry and Engineering, 2004,21(3): 174-176
Copyright 2010 by 化学工业与工程