[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2007, Vol. 24 Issue (3) :195-198    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
液固下喷自吸环流反应器流体力学特性
刘亚娟;张金利;
天津大学化工学院,天津大学化工学院 天津300072,天津300072
Flow Properties of Liquid-Solid Jet Loop Reactor
LIU Ya-juan,ZHANG Jin-li (School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China)
(School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China

摘要
参考文献
相关文章
Download: PDF (262KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 采用改进皮托管测定了液固下喷自吸环流反应器中的液体平均速度及液相湍流强度分布,采用PV4A颗粒浓度速度测量仪测定了固含率分布。试验结果表明:随着液体喷射流量的增大,液体平均速度、液相湍流强度及固含率均增大;在导流筒内液相平均速度近似管流分布,在环隙中的速度分布基本均匀;在导流筒和环隙内固含率沿径向分布均匀。该研究对于下喷环流反应器的放大与优化有重要指导意义。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
刘亚娟
张金利
关键词喷射环流反应器   液相速度     
Abstract: Flow properties were measured in the liquid-solid jet loop reactor.The liquid average velocity and the turbulent violence were measured through the modified Pito tube.The local solid hold-up was measured by using PV4A particle content equipment.It showed that the liquid average velocity,the turbulent violence and the solid hold-up increased with the increase of jet liquid flow rates. Inside the draft tube,the liquid average velocity indicated approximately the distribution of tube flow,while within the annular region,the liquid velocity distribution was uniform.The radical distribution of the solid hold-up was uniform within both the draft tube and the annular region.This flow property is fundamental to the scale-up design and optimization of jet loop reactors.
Keywords:   
Received 2007-05-15; published 2007-05-15
引用本文:   
刘亚娟;张金利;.液固下喷自吸环流反应器流体力学特性[J].  化学工业与工程, 2007,24(3): 195-198
LIU Ya-juan,ZHANG Jin-li .Flow Properties of Liquid-Solid Jet Loop Reactor[J].  Chemcial Industry and Engineering, 2007,24(3): 195-198
Copyright 2010 by 化学工业与工程