[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2009, Vol. 26 Issue (5) :391-394    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
11-钨钛杂多酸盐催化合成乙酸正丁酯
单秋杰;
齐齐哈尔大学化学与化学工程学院;
Synthesis of n-Butyl Acetate by 11-Tungstotitanic Heteropoly Acids Catalyst
SHAN Qiu-jie(School of Chemistry and Chemical Engineering,Qiqihar University,Qiqihar 161006,Heilongjiang Province,China)
(School of Chemistry and Chemical Engineering,Qiqihar University,Qiqihar 161006,Heilongjiang Province,China

摘要
参考文献
相关文章
Download: PDF (369KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 合成了4种具有Keggin结构的11-钨钛多元杂多酸盐K6[MTiW11(H2O)O39](M=Cu,Zn,Cd,Ni),并以所合成的杂多酸盐催化合成乙酸正丁酯。探讨了醇、酸摩尔比,催化剂的用量,反应时间和反应温度对酯化率的影响。结果表明,反应适宜条件为:醇、酸摩尔比为1.0,催化剂用量为原料质量的1.0%,反应温度为120℃,反应时间为5.0 h。乙酸正丁酯的酯化率为80%以上。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
单秋杰
关键词钨钛杂多酸盐   乙酸正丁酯     
Abstract: Four kinds of 11-tungstotitanic heteropoly acid complexes with Keggin structure such as(K_6[MTiW_(11)(H_2O)O_(39)])(M=Cu,Zn,Cd,Ni) were synthesized.n-Butyl acetate was prepared by tungstotitanic heteropoly complexes.The results indicate that the best reaction conditions are: molar ratio of acetic acid to n-butanol is 1∶1,the dosage of catalyst is 1% of the materials gross,the reaction temperature is(120 ℃,) and the reaction time is 5 h.The ester yield of n-butyl acetate is more than 80%.
Keywords:   
Received 2009-09-15; published 2009-09-15
引用本文:   
单秋杰;.11-钨钛杂多酸盐催化合成乙酸正丁酯[J].  化学工业与工程, 2009,26(5): 391-394
SHAN Qiu-jie.Synthesis of n-Butyl Acetate by 11-Tungstotitanic Heteropoly Acids Catalyst[J].  Chemcial Industry and Engineering, 2009,26(5): 391-394
Copyright 2010 by 化学工业与工程