[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2012, Vol. 29 Issue (3) :56-59    DOI:
过程与设备 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
立装规整填料的性能研究
 李仙舟, 褚雅志, 王领, 刘燕, 马晓迅
1西北大学化工学院;2西安思瑞迪精馏工程有限公司
Performance of Vertical Filling Structured Packing
 LI  Xian-Zhou, CHU  Ya-Zhi, WANG  Ling, LIU  Yan, MA  Xiao-Xun
1College of Chemical Engineering,Northwest University;2Xi’an ThreeDimensional Distillation Engineering Co.,Ltd

摘要
参考文献
相关文章
Download: PDF (1805KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 以空气-水为工质研究了立装规整填料的流体力学性能;利用CO2-空气-水体系研究其传质性能,并与相同试验条件下的平装规整填料进行对比。结果表明,在相同条件下,2者的压降没有明显变化,但立装填料比平装填料的壁流量和液相总传质单元高度分别降低了10.7%和17.4%,其流体力学和传质性能均优于平装填料。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
李仙舟
褚雅志
王领
刘燕
马晓迅
关键词填料   立装   流体力学性能   传质性能     
Abstract: Hydrodynamics performance of vertical filling structured packing in air-water system, and the mass transfer performance in air-water-CO2 system were studied. It was also compared with the flat structured packing under the same experimental conditions. The results showed that,under the same conditions, there was no significant change in pressure drop,but the wall flow and liquid phase of the total height of mass transfer unit of the vertical filling structured packing were average lower of 10.7%, 17.4% respectively, compared with the flat structured packing. The hydrodynamics performance and mass transfer performance of the vertical filling structured packing are better than the ordinary flat structured packing.
Keywordspacking   vertical filling   hydrodynamics performance   mass transfer performance     
Received 2011-11-21;
Corresponding Authors: 李仙舟,电话:15289365026,E-mail:lxz_3756@163.com。     Email: lxz_3756@163.com
About author: 李仙舟(1984-),男,甘肃武威人,硕士,现从事塔内件的开发与研究。
引用本文:   
李仙舟, 褚雅志, 王领, 刘燕, 马晓迅.立装规整填料的性能研究[J].  化学工业与工程, 2012,29(3): 56-59
LI Xian-Zhou, CHU Ya-Zhi, WANG Ling, LIU Yan, MA Xiao-Xun.Performance of Vertical Filling Structured Packing[J].  Chemcial Industry and Engineering, 2012,29(3): 56-59
Copyright 2010 by 化学工业与工程