[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
��ѧ��ҵ�빤�� 1986, Vol. 3 Issue (3) :6-12    DOI:
���� ����Ŀ¼ | ����Ŀ¼ | ������� | �߼����� << | >>
�����岻��������������е�Ӧ����ʴ����
���ɺ�;�ŵ¿�;
ұ�𲿸����о���Ժ,ұ�𲿸����о���Ժ ������ѧԺ
The Stress Corrosion Cracking of Austenic Stainless Steel in Polythionic Acid
Liang Cheng-Hao Zhang De-Kang Central Iron and Steel Research Institute
ժҪ
�����
�������
Download: PDF (0KB)   HTML 0KB   Export: BibTeX or EndNote (RIS)      Supporting Info
ժҪ ͨ������κͺ㸺������Ӳ��Ϻ͸�ʴ�������Ͻ�̼����M_(23)C_6�������о�������18-8�Ͱ����岻�����H_2S_zO_0��Һ�е�Ӧ����ʴ��Ϊ���о�ָ��,����Ũ����2.0��6.0��,PHֵ��0.8��1.8��Χ�dz���Ӧ����ʴ���ѵ����н��ʡ��Ͽڽ������,����ϵ�е������������͡��ڸ���ϵ����ƶ�����Ĵ����Dz���������Ӧ����ʴ���Ƶ���Ҫԭ��
Service
�ѱ����Ƽ�������
�����ҵ����
�������ù�����
Email Alert
RSS
�����������
���ɺ�
�ŵ¿�
���ɺ�
�ŵ¿�
�ؼ�����   
Abstract�� The stress corrosion cracking(SCC) behaviors of sensitized 18Cr-8 Ni austenitic stainless steel in polythionic acid(H_2S_XO_6) were studied by means of constant-strain and constant-load tests with special attention to material composition, and environmental and M_(23)C_6 factors. It was found that the samples were quite susceptible to SCC in a medium of 2.0��6.0% H_2S_XO_6 with PH 0.8��1.8. The metallograph indicates that the cracking in this system is intergranular and the active dissolution of chromium-depleted regions along the grain boudaries is resnonsible for intergranulai SCC.
Keywords��   
Received 1986-07-15; published 1986-07-15
���ñ���:   
���ɺ�;�ŵ¿�;.�����岻��������������е�Ӧ����ʴ����[J].  ��ѧ��ҵ�빤��, 1986,3(3): 6-12
Liang Cheng-Hao Zhang De-Kang Central Iron and Steel Research Institute.The Stress Corrosion Cracking of Austenic Stainless Steel in Polythionic Acid[J].  Chemcial Industry and Engineering, 1986,3(3): 6-12
Copyright 2010 by ��ѧ��ҵ�빤��