[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2001, Vol. 18 Issue (4) :187-191    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
催化精馏过程制备碳酸二甲酯的研究
姜忠义,王泳
天津大学化工学院!天津300072,天津大学化工学院!天津300072
Study on DMC Preparation by a Catalytic Distillation Process
JIANG Zhong yi, WANG Yong (School of Chemical Engineering, Tianjin University, Tianjin 300072, China)
(School of Chemical Engineering, Tianjin University, Tianjin 300072, China

摘要
参考文献
相关文章
Download: PDF (0KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 在自制的催化精馏实验装置中 ,以等体积浸渍法负载于碳分子筛上的 1 2 -磷钨酸为催化剂 ,将其捆束型的方式装填于精馏塔中 ,通过碳酸丙烯酯和甲醇之间简单的酯交换反应来进行碳酸二甲酯的制备。通过试验分别考察了原料配比、操作压力、回流比、处理量等工艺参数对催化精馏过程的影响 ,从而确定出适宜的工艺操作条件
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
姜忠义
王泳
关键词碳酸二甲酯   酯交换   催化精馏     
Abstract: In a catalytic distillation column, dimethyl carbonate (DMC) was prepared through a simple transesterification reaction between methanol and propylene carbonate using 12 tungstophoric acid supported onto carbon molecular sieve as heterogeneous catalyst. The effect of operational pressure, molar ratio in feed streams, reflux ratio and throughput on propylene carbonate conversion were experimentally investigated. The appropriate operational conditions were obtained.
Keywords:   
Received 2001-07-15; published 2001-07-15
引用本文:   
姜忠义,王泳.催化精馏过程制备碳酸二甲酯的研究[J].  化学工业与工程, 2001,18(4): 187-191
JIANG Zhong yi, WANG Yong .Study on DMC Preparation by a Catalytic Distillation Process[J].  Chemcial Industry and Engineering, 2001,18(4): 187-191
Copyright 2010 by 化学工业与工程