[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2006, Vol. 23 Issue (1) :1-5    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
浆料催化精馏制备醋酸甲酯
曲宇霞;蔡旺锋;许春建;王卉;周明;
天津大学化学工程研究所,天津大学化学工程研究所,天津大学化学工程研究所,天津大学化学工程研究所,天津大学化学工程研究所 天津300072,天津300072,天津300072,天津300072,天津300072
Preparation of Methyl Acetate by Slurry Catalytic Distillation Process
QU Yu-xia,CAI Wang-feng,XU Chun-jian,WANG Hui,ZHOU Ming(Chemical Engineering Research Center,Tianjin University,Tianjin 300072,China)
(Chemical Engineering Research Center,Tianjin University,Tianjin 300072,China

摘要
参考文献
相关文章
Download: PDF (187KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 在内径为76 mm的常压玻璃塔内,精馏段填充θ环,反应段为筛板,以甲醇与醋酸酯化反应合成醋酸甲酯为模型反应,采用平均粒径为4μm的强酸性大孔型离子交换树脂为催化剂,对浆料催化精馏工艺制备醋酸甲酯进行了试验研究。考察了催化剂浓度、进料比、进料总流量和回流比等因素对该过程的影响。在选定的试验条件下,醋酸甲酯收率可达86.4%,塔顶酯的纯度可达92.95%(质量分数)。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
曲宇霞
蔡旺锋
许春建
王卉
周明
关键词浆料催化精馏   醋酸甲酯   酯化反应     
Abstract: In this paper,a new catalytic distillation process is studied on the production of methyl acetate from methanol and glacial acetic acid.The experiments were carried out in a glass column with an inner diameter of 76 mm.In the column,the rectifying section is filled with θ rings and the reactive section is composed of sieve plates to ensure high liquid holdups.The catalyst is fine particles of about 4 μm in diameter and forms slurry with glacial acetic acid.The effects of catalyst concentration,feed composition,total feed and reflux ratio on the conversion ratio are experimentally studied.The experimental results show that the conversion and the purity of methyl acetate in the distillate can reach 86.4% and 92.95%,respectively.
Keywords:   
Received 2006-01-15; published 2006-01-15
引用本文:   
曲宇霞;蔡旺锋;许春建;王卉;周明;.浆料催化精馏制备醋酸甲酯[J].  化学工业与工程, 2006,23(1): 1-5
QU Yu-xia,CAI Wang-feng,XU Chun-jian,WANG Hui,ZHOU Ming.Preparation of Methyl Acetate by Slurry Catalytic Distillation Process[J].  Chemcial Industry and Engineering, 2006,23(1): 1-5
Copyright 2010 by 化学工业与工程