[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2007, Vol. 24 Issue (5) :385-388    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
Pd/HZSM-5涂层催化剂及正十二烷裂解
孟凡旭;赵海龙;张香文;李佳;邹吉军;
天津大学化工学院,天津大学化工学院,天津大学化工学院,天津大学化工学院,天津大学化工学院 天津300072,天津300072,天津300072,天津300072,天津300072
Preparation of Pd/HZSM-5 Film Catalyst for Cracking of n-Dodecane
MENG Fan-xu,ZHAO Hai-long,ZHANG Xiang-wen,LI Jia,ZOU Ji-jun(School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China)
(School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China

摘要
参考文献
相关文章
Download: PDF (0KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 采用涂覆法在不锈钢反应管内壁制备了Pd/HZSM-5涂层催化剂,并研究正十二烷裂解过程。采用SEM和XPS研究了涂层催化剂的表面结构,形态和组成,结果表明涂层表面平整,厚度大约10μm,Pd主要以0价态存在。600℃,4 MPa条件下正十二烷裂解热沉和产物分布结果表明,HZSM-5催化裂解热沉较热裂解热沉明显提高,负载Pd后,热沉进一步提高16.9%。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
孟凡旭
赵海龙
张香文
李佳
邹吉军
关键词吸热燃料   Pd/HZSM-5涂层   催化裂解   热沉     
Abstract: A method for the preparation of Pd-supported HZSM-5 zeolite film was described.The cracking of jet fuel model compound of n-dodecane in Pd/HZSM-5 catalyst-coated tube was studied.The Pd/HZSM-5 film was characterized by SEM and XPS.It was shown that,the surface was approximately flat and the thickness of the zeolite-coating layer was about 10 μm.And Pd existed as metallic state.The heat sink and the decomposition under 4 MPa at(600 ℃,) showed that the heat sink could be enhanced due to the existence of zeolite HZSM-5,and Pd/HZSM-5 film can increase the heat sink by 16.9%.
Keywords:   
Received 2007-09-15; published 2007-09-15
引用本文:   
孟凡旭;赵海龙;张香文;李佳;邹吉军;.Pd/HZSM-5涂层催化剂及正十二烷裂解[J].  化学工业与工程, 2007,24(5): 385-388
MENG Fan-xu,ZHAO Hai-long,ZHANG Xiang-wen,LI Jia,ZOU Ji-jun.Preparation of Pd/HZSM-5 Film Catalyst for Cracking of n-Dodecane[J].  Chemcial Industry and Engineering, 2007,24(5): 385-388
Copyright 2010 by 化学工业与工程