[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2009, Vol. 26 Issue (3) :203-206    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
负载型纳米复合杂多酸催化α-蒎烯的环氧化反应研究
吴春华;秦永剑;张加研;冷时雁;
西南林学院木质科学与装饰工程学院;
Epoxidation of α-Pinene Catalyzed by Supported Nano-Heteropoly Acid
WU Chun-hua,QIN Yong-jian,ZHANG Jia-yan,LENG Shi-yan(Faculty of Wood Science & Decoration Engineering,Southwest Forestry College,Kunming 650224,Yunnan Province,China)
(Faculty of Wood Science & Decoration Engineering,Southwest Forestry College,Kunming 650224,Yunnan Province,China

摘要
参考文献
相关文章
Download: PDF (403KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 以自制的负载型纳米复合杂多酸H3PW12O40/SiO2催化剂和30%(质量分数)H2O2制备的过氧乙酸为氧化剂,研究α-蒎烯环氧化反应。试验结果表明,过氧乙酸与α-蒎烯的摩尔比为3.0,相转移催化剂四丁基溴化铵浓度为0.06 mol/L,负载型纳米复合杂多酸用量为4%(占α-蒎烯质量百分数),在三氯甲烷溶剂中反应2.0 h,反应温度在16~20℃,α-蒎烯转化率达86.53%,2,3-环氧蒎烷选择性为74.84%。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
吴春华
秦永剑
张加研
冷时雁
关键词α-蒎烯   环氧化   过氧乙酸   负载型杂多酸     
Abstract: The epoxidation reaction of α-pinene was discussed using preparation of peroxyacetyl acid from 30% H_2O_2.Nano-H_3PW_(12)O_(40)/SiO_2 was selfmade and was used in the epoxidation.The optimized condition was obtained.When the molar ratio of α-pinene to peroxyacetic acid was 1∶3,the concentration of ammonium bromide was 0.06 mol/L,dosage of nano-H_3PW_(12)O_(40)/SiO_2 was 4%(of the mass ratio of α-pinene),the selectivity of 2,3-epoxypinene was 74.84% and the conversion of α-pinene can reach 86.53% at 16—20 ℃ for 2 h in CHCl_3.
Keywords:   
Received 2009-05-15; published 2009-05-15
引用本文:   
吴春华;秦永剑;张加研;冷时雁;.负载型纳米复合杂多酸催化α-蒎烯的环氧化反应研究[J].  化学工业与工程, 2009,26(3): 203-206
WU Chun-hua,QIN Yong-jian,ZHANG Jia-yan,LENG Shi-yan.Epoxidation of α-Pinene Catalyzed by Supported Nano-Heteropoly Acid[J].  Chemcial Industry and Engineering, 2009,26(3): 203-206
Copyright 2010 by 化学工业与工程