[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2009, Vol. 26 Issue (6) :487-492    DOI:
论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
高压下ZnO晶粒的快速生长及其拉曼光谱研究
张海宁;朱茂电;陆中;
常州轻工职业技术学院;江苏工业学院;
Rapid Growth of ZnO Under High Pressure and Its Raman Spectrum
ZHANG Hai-ning~1,ZHU Mao-dian~1,LU Zhong~2(1.Changzhou Institute of Light Industry,Changzhou 213164,Jiangsu Province,China;2.Jiangsu Polytechnic University,Changzhou 213164,Jiangsu Province,China)
(1.Changzhou Institute of Light Industry,Changzhou 213164,Jiangsu Province,China;2.Jiangsu Polytechnic University,Changzhou 213164,Jiangsu Province,China

摘要
参考文献
相关文章
Download: PDF (1041KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 利用陶瓷烧结基本理论以及高压烧结的特点对高压下ZnO晶粒快速生长的现象进行了分析,并结合拉曼光谱对高压下得到的ZnO晶体进行了研究。结果表明:ZnO在高压下烧结时,其晶粒生长速率大大提高,在900℃时约为常压下晶粒生长速率的960倍;高压下ZnO晶粒快速生长的原因可能是由于高压下ZnO中间隙锌离子浓度大大增加所致;通过Raman光谱分析表明高压下生长得到ZnO晶体质量随着温度的升高而有所提高。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
张海宁
朱茂电
陆中
关键词ZnO单晶   高压烧结   拉曼光谱     
Abstract: The phenomenon of the rapid growth of ZnO single crystal was analysed by using the basic theory of ceramic sintering and the characteristics of high-pressure sintering.At the same time,the obtained ZnO single crystal was studied by combining with Raman spectrum.The results showed the growth rate of ZnO was greatly increased by high-pressure sintering process,it was nearly 960 times to that under the atmospheric pressure at(900 ℃.) The reason of which was probably caused by the great increase of zinc ion concentration in the gap under the high pressure.Analysed by Raman spectrum,the quality of crystal which was obtained under high pressure was improved with increasing temperature.
Keywords:   
Received 2009-11-15; published 2009-11-15
引用本文:   
张海宁;朱茂电;陆中;.高压下ZnO晶粒的快速生长及其拉曼光谱研究[J].  化学工业与工程, 2009,26(6): 487-492
ZHANG Hai-ning~1,ZHU Mao-dian~1,LU Zhong~2.Rapid Growth of ZnO Under High Pressure and Its Raman Spectrum[J].  Chemcial Industry and Engineering, 2009,26(6): 487-492
Copyright 2010 by 化学工业与工程