Y型导向固阀塔板的雾沫夹带性能

摘要在直径1.2 m、板间距0.45 m、内置4块塔板的有机玻璃冷模塔内,采用空气-水系统,对Y型导向固阀塔板进行了雾沫夹带性能研究。考察了3种出口堰高、3种液流强度和2种开孔率的改变对Y型导向固阀塔板雾沫夹带性能的影响,并与筛孔型塔板进行对比实验研究。结果表明,Y型导向固阀塔板的雾沫夹带性能随阀孔动能因子的增加呈现出稳定的规律性,在低堰高、低液流强度下表现更优;对比筛孔型塔板,Y型固阀的设计结构表现出明显的抗雾沫夹带优势,同时具有更高的气相负荷操作上限。通过实验数据拟合出了2种开孔率的Y型导向固阀塔板雾沫夹带率的模型方程式,为后续塔板的设计与高黏度物系的分离研究提供参考。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	岳锡荣
	赵培
	鲁宽华
	牛静龙

关键词：导向固阀塔板筛孔塔板雾沫夹带模型方程式液泛点气速

Abstract： Using the air-water system, the entrainment performance of Y-type guided fixed valve tray was studied in a plexiglass cold mold tower with diameter of 1.2 m, plate spacing of 0.45 m and four trays inside. The effects of changing three outlet weir heights, three liquid flow intensities and two opening rates on the entrainment performance of Y-type guided fixed valve tray were investigated, and the experimental results were compared with the sieve trays. The results show that the entrainment performance of Y-type guided fixed valve tray has a stable regularity with the increase of the valve hole kinetic energy factor, and it performs better under low weir height and low liquid flow intensity. Compared with the sieve tray, the structure of Y-type guided fixed valve shows obvious advantages of anti-entrainment and has a higher upper limit of gas phase load operation. The model correlation formula of entrainment rate of Y-type guided fixed valve tray with two kinds of opening rate was obtained by fitting the experimental data, which can provide reference for the design of subsequent trays and the separation of high viscosity system.

Keywords： guided fixed valve tray sieve tray entrainment model correlation formula flooding gas velocity

Received 2021-12-28;

Corresponding Authors: 赵培,副教授,E-mail:64586116@163.com。 Email: 64586116@163.com

About author: 岳锡荣(1997-),女,硕士研究生,现从事分离工程方面的研究。

引用本文:

岳锡荣, 赵培, 鲁宽华, 牛静龙.Y型导向固阀塔板的雾沫夹带性能[J]. 化学工业与工程, 2023,40(4): 94-101

YUE Xirong, ZHAO Pei, LU Kuanhua, NIU Jinglong.Entrainment performance of Y-type guided fixed valve tray[J]. Chemcial Industry and Engineering, 2023,40(4): 94-101

[1] 詹宇木, 齐亮, 刘静, 等. 主动旋转阀的流体力学性能研究[J]. 高校化学工程学报, 2016, 30(2):332-340 ZHAN Yumu, QI Liang, LIU Jing, et al. Hydrodynamic properties of a forced-rotary valve[J]. Journal of Chemical Engineering of Chinese Universities, 2016, 30(2):332-340(in Chinese)
[2] 王子宗, 杨娜, 王振维, 等. 新型固定阀塔板的性能[J]. 化工进展, 2009, 28(S2):378-382 WANG Zizong, YANG Na, WANG Zhenwei, et al. Performance of new fixed valve tray[J]. Chemical Industry and Engineering Progress, 2009, 28(S2):378-382(in Chinese)
[3] 李春利, 王志英, 李柏春, 等. 塔板技术最新进展和研究展望[J]. 河北工业大学学报, 2002, 31(1):20-25 LI Chunli, WANG Zhiying, LI Baichun, et al. Latest progress and research prospect of tray[J]. Journal of Hebei University of Technology, 2002, 31(1):20-25(in Chinese)
[4] SUN J, LUO X, JIANG S, et al. Computational fluid dynamics hydrodynamic analysis of a cross-orthogonal fixed-valve tray[J]. Chemical Engineering & Technology, 2014, 37(3):383-391
[5] NUTTER D E. High capacity gray for gas liquid contact apparatus:US5360583[P]. 1994-11-01
[6] 高有飞, 张振千, 刘兴. LVG型塔盘的研究[J]. 化工进展, 2007(S1):84-88 GAO Youfei, ZHANG Zhenqian, LIU Xing. Study on LVG type tray[J]. Chemical Industry and Engineering Progress, 2007(S1):84-88(in Chinese)
[7] 王良华, 姚克俭, 李育敏, 等. 新型固定阀塔板的流体力学和传质性能研究[J]. 化学工程, 2005, 33(2):4-8 WANG Lianghua, YAO Kejian, LI Yumin, et al. Study on hydraulics and mass transfer performance of new fixed valve tray[J]. Chemical Engineering (China), 2005, 33(2):4-8(in Chinese)
[8] 付小苏, 张颂红, 刘炳炎, 等. 圆形固定阀塔板的性能研究及其工业应用[J]. 石油化工, 2011, 40(7):775-779 FU Xiaosu, ZHANG Songhong, LIU Bingyan, et al. Performance and industrial application of round standing-valve tray[J]. Petrochemical Technology, 2011, 40(7):775-779(in Chinese)
[9] 何杰, 王昕, 俞旭峰, 等. 低雾沫导向梯形固定阀塔板流体力学性能[J]. 化学工程, 2015, 43(7):39-43 HE Jie, WANG Xin, YU Xufeng, et al. Hydrodynamic performances of low entrainment directed-trapezoidal fixed valve tray[J]. Chemical Engineering (China), 2015, 43(7):39-43(in Chinese)
[10] LAVASANI M S. Hydrodynamic study of different configurations of sieve trays for a dividing wall column by using experimental and CFD methods[J]. Chemical Engineering and Processing-Process Intensification, 2018, 129:162-170
[11] 孙兰义, 李军. HEFV固阀塔板流体力学与传质性能研究[J]. 石油化工设备, 2008, 37(1):8-11 SUN Lanyi, LI Jun. Hydrodynamic and mass transfer performance study of HEFV tray[J]. Petro-Chemical Equipment, 2008, 37(1):8-11(in Chinese)
[12] 孙兰义, 唐正强, 李军, 等. 三种固阀塔板的性能比较[J]. 化学工程, 2009, 37(12):9-11 SUN Lanyi, TANG Zhengqiang, LI Jun, et al. Performance comparison of three fixed-valve trays[J]. Chemical Engineering (China), 2009, 37(12):9-11(in Chinese)
[13] SCHULZ J. Analysis of entrained liquid by use of optical measurement technology[J]. Chemical Engineering Research and Design, 2019, 147:624-633
[14] 张秋香, 张婧, 赵培. 波纹导向浮阀塔板的雾沫夹带研究[J]. 现代化工, 2016, 36(9):146-149 ZHANG Qiuxiang, ZHANG Jing, ZHAO Pei. Entrainment of wave directed float valve tray[J]. Modern Chemical Industry, 2016, 36(9):146-149(in Chinese)
[15] CAO R, HE Y, GUO H M, et al. Entrainment performance and model of multidowncomer sieve trays[J]. Industrial & Engineering Chemistry Research, 2017, 56(23):6755-6763
[16] 张建勇. B型导向固阀塔板的开发研究[D]. 上海:华东理工大学, 2012 ZHANG Jianyong. Development and study of the B-type directed fixed valve tray[D]. Shanghai:East China University of Science and Technology, 2012 (in Chinese)
[17] 中石化上海工程有限公司. 化工工艺设计手册-上册[M]. 5版. 北京:化学工业出版社, 2018
[18] 李超, 吕晓东. 2019年世界和中国石化工业回顾及2020年展望[J]. 当代石油石化, 2020, 28(2):16-21 LI Chao, LV Xiaodong. 2019 review and 2020 prospect for world and China's petrochemical industry[J]. Petroleum & Petrochemical Today, 2020, 28(2):16-21(in Chinese)