[1] Fan J, Ding W, Zhang J, et al. A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving[J]. International Journal of Heat and Mass Transfer, 2009, 52(1/2):33-44
[2] Yang J, Zeng M, Wang Q. Numerical investigation on combined single shell-pass shell-and-tube heat exchanger with two-layer continuous helical baffles[J]. International Journal of Heat and Mass Transfer, 2015, 84:103-113
[3] Guo S, Wu Z, Li W, et al. Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes[J]. International Journal of Heat and Mass Transfer, 2015, 85:281-291
[4] Eiamsa-Ard S, Wongcharee K, Eiamsa-Ard P, et al. Heat transfer enhancement in a tube using delta-winglet twisted tape inserts[J]. Applied Thermal Engineering, 2010, 30(4):310-318
[5] Liu W, Yang K, Liu Z, et al. Mechanism of heat transfer enhancement in the core flow of a tube and its numerical simulation[J]. The Open Transport Phenomena Journal, 2010, 2:9-15
[6] Saha S K, Dutta A, Dhal S K. Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements[J]. International Journal of Heat and Mass Transfer, 2001, 44(22):4211-4223
[7] 林志敏. 扭带及涡产生器在管内诱导的二次流强度及其强化传热特性研究[D]. 兰州:兰州交通大学, 2011 Lin Zhimin. The characteristics of secondary flow and heat transfer enhancement in circular tube with twisted tape or vortex generators[D]. Lanzhou:Lanzhou Jiatong University, 2011(in Chinese)
[8] 刘伟, 杨昆. 管内核心流强化传热的机理与数值分析[J]. 中国科学:E辑, 2009, 39(4):661-666
[9] Guo Z, Li D, Wang B. A novel concept for convective heat transfer enhancement[J]. International Journal of Heat and Mass Transfer, 1998, 41(14):2221-2225
[10] 过增元. 换热器中的场协同原则及其应用[J]. 机械工程学报, 2003, 39(12):1-9 Guo Zengyuan. Principle of field coordination in heat exchangers and its appliaitons[J]. Chinese Journal of Mechanical Engineering, 2003, 39(12):1-9(in Chinese)
[11] Han H, He Y, Li Y, et al. A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations[J]. International Journal of Heat and Mass Transfer, 2013, 65:686-695
[12] 杜文静, 王红福, 袁晓豆, 等. 椭圆管连续螺旋折流板换热器壳侧性能评价及三场协同分析[J]. 化工学报, 2013, 64(4):1145-1150 Du Wenjing, Wang Hongfu, Yuan Xiaodou, et al, Evaluation of shell sid performance and analysis on continuous helical baffled heat exchangers with elliptical tubes[J]. CIES Journal, 2013, 64(4):1145-1150(in Chinese)
[13] 华贲, 仵浩, 刘二恒. 基于(火用)经济评价的换热器最优传热温差[J].化工进展, 2009, 28(7):1142-1146 Hua Ben, Wu Hao, Liu Erheng. Exergy-Econmics based method about optimal termperature difference in heat-exchanger[J]. Chemical Industry and Engineering Progress, 2009, 28(7):1142-1146(in Chinese)
[14] 过增元, 程新广, 夏再忠. 最小热量传递势容耗散原理及其在导热优化中的应用[J]. 科学通报, 2003, 48(1):21-25
[15] Liu W, Liu Z, Guo Z. Physical quantity synergy in laminar flow field of convective heat transfer and analysis of heat transfer enhancement[J]. Chinese Science Bulletin, 2009, 54(19):3579-3586
[16] Ji W, Jacobi A M, He Y, et al. Summary and evaluation on single-phase heat transfer enhancement techniques of liquid laminar and turbulent pipe flow[J]. International Journal of Heat and Mass Transfer, 2015, 88:735-754
[17] Webb R. Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design[J]. International Journal of Heat and Mass Transfer, 1981, 24(4):715-726
[18] Jedsadaratanachai W, Jayranaiwachira N, Promvonge P. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles[J]. Chinese Journal of Chemical Engineering, 2015, 23(2):342-349
[19] Zheng N, Liu P, Shan F, et al. Effects of rib arrangements on the flow pattern and heat transfer in an internally ribbed heat exchanger tube[J]. International Journal of Thermal Sciences, 2016, 101:93-105
|
2019, Vol. 36 
