淤浆聚合体系乙烯溶解度及传质系数测定

摘要

对采用淤浆聚合法聚合生成超高相对分子质量聚乙烯过程中的传质过程进行了研究，考察了压力、温度对平衡溶解度的影响以及搅拌速率和物料对传质系数K_L的影响规律。结果表明：乙烯溶解度随气相中乙烯压力的升高而线性增加，气液平衡关系符合亨利定律；温度升高，气体溶解度减小；搅拌速率增大，相应的传质系数线性增大；加入聚乙烯颗粒会使吸收速率降低，物料量与传质系数基本呈反比例关系。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	孙红亮
	司荣双
	李国兵

关键词：超高相对分子质量聚乙烯；淤浆聚合；传质；吸收速率

Abstract：

The mass transfer process of polymerization of ultra-high molecular weight polyethylene(PE) using slurry polymerization was studied. The effects of pressure and temperature on gas solubility, stirring rate and polyethylene particles on mass transfer coefficient K_L were investigated. Experiment results show that the vapor-liquid equilibrium relationship of system ethylene-hexane conforms to Henry's law and the solubility of ethylene increase linearly with the increase of ethylene pressure in the gas phase. The solubility of ethylene in hexane decreases with increasing temperature. The corresponding transfer coefficient increases linearly with stirring rate. The presence of polyethylene particles could decrease the absorption rate of ethylene and the relationship between PE quality and mass transfer coefficient is almost in an inverse proportion.

Keywords： ultra high molecular weight polyethylene； slurry polymerization； mass transfer； absorption rate

Received 2016-03-16;

Corresponding Authors: 李国兵,E-mail:lgbbox@tju.edu.cn。 Email: lgbbox@tju.edu.cn

About author: 孙红亮(1987-),男,硕士研究生,研究方向为超高相对分子质量聚乙烯的合成。

引用本文:

孙红亮, 司荣双, 李国兵.淤浆聚合体系乙烯溶解度及传质系数测定[J]. 化学工业与工程, 2017,34(6): 70-74

Sun Hongliang, Si Rongshuang, Li Guobing.Determination of Solubility and Mass Transfer Coefficient of Ethylene in Slurry Polymerization System[J]. Chemcial Industry and Engineering, 2017,34(6): 70-74

[1] Nowlin T E. 1. Global polyethylene business overview[M]//Business and technology of the global polyethylene industry:An in-depth look at the history, technology, catalysts, and modern commercial manufacture of polyethylene and its products. America:John Wiley & Sons, Inc, 2014:1-45
[2] 杨挺,程丽鸿,钱丹. 我国聚乙烯发展现状及市场分析[J]. 绝缘材料,2013,(3):33-36 Yang Ting, Cheng Lihong, Qian Dan. Development and market analysis of polyethylene in China[J]. Insulating Materials, 2013,(3):33-36(in Chinese)
[3] 许佳润,周南桥,晏梦雪,等. 低密度聚乙烯泡沫塑料研究进展[J]. 工程塑料应用, 2010, 38(9):89-92 Xu Jiarun, Zhou Nanqiao, Yan Mengxue, et al. Research progress of low density polyethylene foam[J]. Engineering Plastics Application, 2010, 38(9):89-92(in Chinese)
[4] 李兵. 高密度聚乙烯技术进展[J]. 当代化工, 2006, 35(5):322-325 Li Bing. The development of high density polyethylene[J]. Contemporary Chemical Industry, 2006, 35(5):322-325(in Chinese)
[5] Sobieraj M C, Rimnac C M. Ultra high molecular weight polyethylene:Mechanics, morphology, and clinical behavior[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2009, 2(5):433-443
[6] Luo C, Guardala N A, Price J L, et al. Structural and dynamic investigations of unstretched and stretched ultrahigh molecular weight polyethylene films. 1-Pyrenyl attachment by bombardment with 4.5 MeV protons and irradiation with eV range photons[J]. Macromolecules, 2002, 35(12):4690-4701
[7] Malpass D B. Introduction to industrial polyethylene:Properties, catalysts, and processes[M]. America:John Wiley & Sons, Inc, 2010
[8] 司荣双, 孙红亮, 王烨, 等. 复合载体负载型催化剂制备UHMWPE动力学行为[J]. 化学工业与工程, 2016, 33(5):33-37 Si Rongshuang, Sun Hongliang, Wang Ye, et al. Kinetic features of UHMWPE preparation with compose-carrier supported catalysts[J]. Chemical Industry and Engineering, 2016, 33(5):33-37(in Chinese)
[9] Ogawa M, Ohshima M, Morinaga K, et al. Quality inferential control of an industrial high density polyethylene process[J]. Journal of Process Control, 1999, 9(1):51-59
[10] 赵锦波,王玉庆. 我国聚乙烯技术的现状及发展[J]. 合成树脂及塑料,2008,25(3):69-72 Zhao Jinbo, Wang Yuqing. Process of polyethylene technologies in China[J]. China Synthetic Resin and Plastics, 2008,25(3):69-72(in Chinese)
[11] Vatankhah M. Kinetics of slurry and gas phase polymerizations of ethylene using a novel heterogeneous Ziegler-Natta catalyst of specific morphology[J]. Iranian Polymer Journal, 2010, 19(11):895-906
[12] Mizan T I, Li J, Morsi B I, et al. Solubilities and mass transfer coefficients of gases in liquid propylene in a surface-aeration agitated reactor[J]. Chemical Engineering Science, 1994, 49(6):821-830
[13] 孙婧元, 蒋浩, 蒋斌波, 等. 乙烯和丙烯在低聚物-正己烷溶液中的溶解度及体积传质系数测定[J]. 化工学报, 2009, 60(9):2153-2160 Sun Jingyuan, Jiang Hao, Jiang Binbo, et al. Solubility and volumetric mass transfer coefficient of ethylene and propylene in n-hexane solution of low molecular weight polyethylene[J]. Journal of Chemical Industry and Engineering, 2009, 60(9):2153-2160(in Chinese)
[14] Li J, Tekie Z, Mizan T I, et al. Gas-Liquid mass transfer in a slurry reactor operating under olefinic polymerization process conditions[J]. Chemical Engineering Science, 1996, 51(95):549-559