基团贡献法预测离子液体的折射率

摘要

基于对离子液体折射率的研究，提出了一种基团贡献法来预测不同温度下离子液体的折射率数值。通过文献搜集了115种离子液体，涵盖5类阳离子和26类阴离子，然后使用新的基团划分方法，共得到39种基团。将115种离子液体的1 161个折射率（λ=589 nm）数据点与模型方程回归，得到了各个基团的贡献值，回归的标准方差为0.00897，平均相对偏差为0.452%。为了进一步检验模型的准确性，用其估算未参与回归的2种代表性离子液体：季铵盐和季鏻盐，得到的平均相对偏差分别为0.520% 和0.284%，说明使用该基团贡献法来预测不同温度下离子液体的折射率是可靠的。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	李晓兵
	崔现宝
	冯天扬
	揭会民
	徐丽
	林瑞榕

关键词：基团贡献法；离子液体；折射率

Abstract：

Based on the study of refractive indices of ionic liquids, a group contribution method is proposed to predict the refractive indices of ionic liquids at different temperatures. Refractive indices of 115 ionic liquids(ILs) including 5 kinds of cations and 26 kinds of anions were collected from literature, and 39 groups were obtained by a new group dividing method. The contribution values of 39 groups were obtained by regressing 1 161 data of refractive indices(λ=589 nm). The standard deviation and the average relative deviation the regression are 0.00897 and 0.452%, respectively. In order to testify the reliability of the model, the proposed model was used to estimate the refractive indices of two ILs which are not involved in the 115 ILs. The average relative deviations of the predictions are 0.520% and 0.284%, respectively, which proves the group contribution method for predicting the refractive indices of ionic liquids at different temperatures is reliable.

Keywords： group contribution method； ionic liquid； refractive index

Received 2015-10-21;

Corresponding Authors: 崔现宝,E-mail:cxb@tju.edu.cn。 Email: cxb@tju.edu.cn

About author: 李晓兵(1990-),女,硕士研究生,现从事离子液体应用于光学透镜的基础研究。

引用本文:

李晓兵, 崔现宝, 冯天扬, 揭会民, 徐丽, 林瑞榕.基团贡献法预测离子液体的折射率[J]. 化学工业与工程, 2017,34(3): 37-42

Li Xiaobing, Cui Xianbao, Feng Tianyang, Jie Huimin, Xu Li, Lin Ruirong.Prediction of Refractive Indices of Ionic Liquids by a Group Contribution Method[J]. Chemcial Industry and Engineering, 2017,34(3): 37-42

[1] 蒋鹏忠. 离子液体的应用与发展前景[J]. 科教文汇(中旬刊), 2008, (3): 195-196 Jiang Pengzhong. The application and development prospects of ionic liquids[J]. Education Science & Culture Magazine, 2008, (3): 195-196(in Chinese)
[2] Brennecke J F, Maginn E J. Ionic liquids: Innovative fluids for chemical processing[J]. AIChE Journal, 2001, 47(11): 2 384-2 389
[3] 彭艳枚, 崔现宝, 张缨, 等. 甲醇-乙酸甲酯-1-丁基-3-甲基咪唑双三氟甲磺酰亚胺盐的等压汽液平衡[J]. 化学工业与工程, 2013, 30(6): 27-31 Peng Yanmei, Cui Xianbao, Zhang Ying, et al. Isobaric vapor-liquid equilibrium for methanol-methyl acetate-1-butyl-3-methyl-imidazoliumbis [(trifluoromethyl) sulfonyl] imide at 101.3 kPa[J]. Chemical Industry and Engineering, 2013, 30(6): 27-31(in Chinese)
[4] 关淑霞, 于海南, 邰永娜. 离子液体的应用进展[J]. 化学工业与工程技术, 2011, 32(6): 32-36 Guan Shuxia, Yu Hainan, Tai Yongna. Application progress of ionic liquids[J]. Chemical Industry and Engineering, 2011, 32(6): 32-36(in Chinese)
[5] 盛卫心, 戎宗明, 英徐根. 基团贡献法分子设计研究的进展[J]. 化学工业与工程, 2007, 24(5): 457-465 Sheng Weixin, Rong Zongming, Ying Xugen. Progress in computer-aided molecular design based on group contribution method[J]. Chemical Industry and Engineering, 2007, 24(5): 457-465(in Chinese)
[6] 文路. 离子液体粘度的QSPR研究[D]. 北京: 北京化工大学, 2011 Wen Lu. QSPR study on the viscosity of ionic liquids[D]. Beijing: Beijing University of Chemical Technology, 2011(in Chinese)
[7] Qiao Y, Ma Y, Huo Y, et al. A group contribution method to estimate the densities of ionic liquids[J]. The Journal of Chemical Thermodynamics, 2010, 42(7): 852-855
[8] 李瑞. 离子液体萃取精馏的萃取剂分子设计[D]. 天津: 天津大学, 2012 Li Rui. Molecular design of ionic liquid entrainers for extractive distillation[D]. Tianjin: Tianjin University, 2012(in Chinese)
[9] 马沛生, 李平, 赵兴民, 等. 用基团贡献方法估算20 ℃下表面张力[J]. 化工学报, 1994, 45(1): 112-116 Ma Peisheng, Li Ping, Zhao Xingmin, et al. Estimating surface tensions by a group contribution method when the temperature is less than 20℃[J]. Journal of Chemical Industry and Engineering, 1994, 45(1): 112-116(in Chinese)
[10] Gradas R L, Coutinho J A P. Group contribution methods for the prediction of thermophysical and transport properties of ionic liquids[J]. AIChE Journal, 2009, 55(5): 1 274-1 290
[11] Soriano A N, Doma Jr B T, Li M. Density and refractive index measurements of 1-ethyl-3-methylimidazolium-based ionic liquids[J]. Journal of the Taiwan Institute of Chemical Engineers, 2010, 41 (1): 115-121
[12] Freire M G, Teles A R R, Rocha M A A, et al. Thermophysical characterization of ionic liquids able to dissolve biomass[J]. Journal of Chemical & Engineering Data, 2011, 56(12): 4 813-4 822
[13] Sattari M, Kamari A, Mohammadi A H, et al. A group contribution method for estimating the refractive indices of ionic liquids[J]. Journal of Molecular Liquids, 2014, 200, Part B: 410-415
[14] Ziyada A K, Wilfred C D, Murugesan T. Densities, viscosities and refractive indices of 1-alkyl-3-propanenitrile imidazolium chloride ionic liquids[J]. Physics and Chemistry of Liquids, 2011, 50(2): 152-160
[15] Ziyada A K, Wilfred C D. Effect of temperature and anion on densities, viscosities, and refractive indices of 1-octyl-3-propanenitrile imidazolium-based ionic liquids[J]. Journal of Chemical & Engineering Data, 2014, 59(5): 1 385-1 390
[16] Ziyada A K, Bustam M A, Wilfred C D, et al. Densities, viscosities, and refractive indices of 1-hexyl-3-propanenitrile imidazolium ionic liquids incorporated with sulfonate-based anions[J]. Journal of Chemical & Engineering Data, 2011, 56(5): 2 343-2 348
[17] Mahrova M, Vilas M, Domínguez A, et al. Physicochemical characterization of new sulfonate and sulfate ammonium ionic liquids[J]. Journal of Chemical & Engineering Data, 2012, 57(2): 241-248
[18] Almeida H F D, Lopes-da-Silva J A, Freire M G, et al. Surface tension and refractive index of pure and water-saturated tetradecyltrihexylphosphonium-based ionic liquids[J]. The Journal of Chemical Thermodynamics, 2013, 57(10): 372-379