太阳能薄膜铜锌锡硒纳米晶的制备与表征

摘要

以金属氯化物(氯化铜、氯化锌、氯化锡)为金属源,二氧化硒为前驱体,乙二醇为溶剂,在不同表面活性剂(PVP、聚氧乙烯月桂醚、聚乙二醇1 000、聚山梨酯80)和不同工艺(制备时间和制备温度)的条件下,采用溶剂热法一步合成六角片状的CZTSe纳米晶体颗粒,并采用X射线衍射仪、紫外可见分光光度计与SEM等手段对CZTSe纳米颗粒的物相、性能、形貌进行表征。实验结果表明,通过加入表面活性剂PVP并控制温度(200 ℃)和合成时间(30 h)可以取得禁带宽度约为1.5 eV、分布均匀、结构为六方片的晶粒,其与太阳能电池所需的最佳禁带宽度相近,有望在新一代太阳能电池中得到应用和推广。

	Service

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章
	马春蕾
	李振荣
	蒋成勇
	邓圣龙
	高宝禄

关键词：太阳能电池； CZTSe纳米晶体；溶剂热法

Abstract：

Using the metal chlorides (copper chloride, zinc chloride and tin chloride) as metal source, selenium dioxide for the precursor and ethylene glycol for solvent, the CZTSe nanocrystals with hexagonal flake was prepared by solvothermal synthesis under the conditions of various surfactants (PVP, polyethylene glycol monooleyl, ether, Macrogol 1000, and Polysorbate 80) and different processes (preparation time and the temperature). And the phase, performance and morphology of CZTSe nano-particles were characterized by XRD, UV, and SEM methods. The experimental results showed that, by means of adding surface activator PVP at 200 ℃ for 30 h, the hexagonal-flake CZTSe nano-crystalline with forbidden bandwidth of 1.5 eV could be obtained, displaying uniform distribution, of which is close to the optimum forbidden bandwidth of solar cells. It is expected to be applied and promoted in a new generation of solar cell.

Keywords： solar cell； CZTSe nano-crystalline； solvothermal method

Received 2015-03-23;

Fund:

辽宁省自然基金(201202087)。

Corresponding Authors: 李振荣,E-mail:lzr621206@126.com。 Email: lzr621206@126.com

About author: 马春蕾,(1971-),女,工程师,从事耐热材料的性能测试。

引用本文:

马春蕾, 李振荣, 蒋成勇, 邓圣龙, 高宝禄.太阳能薄膜铜锌锡硒纳米晶的制备与表征[J]. 化学工业与工程, 2015,32(4): 68-72

Ma Chunlei, Li Zhenrong, Jiang Chengyong, Deng Shenglong, Gao Baolu.Preparation and Characterization of Thin-Film Solar Cells with Nanocrystalline Copper Zinc Tin and Selenium[J]. Chemcial Industry and Engineering, 2015,32(4): 68-72

[1] Repins I, Contreras M A, Egaas B, et al. 19.9%-efficient ZnO/CdS/CIGS solar cell with 81.2% fill factor[J]. Progress in Photovohaics, 2008, 16(3): 235-239
[2] 王波, 刘平, 李伟, 等. 铜铟镓硒(CIGS)薄膜太阳能电池的研究进展[J]. 材料导报A, 2011, 25(10): 55-58 Wang Bo, Liu Ping, Li Wei, et al. Progress in research of CIGS thin film solar cells[J]. Materials Review A, 2011, 25(10):55-58 (in Chinese)
[3] 向卫东, 王京, 杨海龙, 等. CuZnSnS₂薄膜太阳能电池材料的研究现状[J]. 材料导报A, 2012, 26(5):129-132 Xiang Weidong, Wang Jing, Yang Hailong, et al. Research progress in CuZnSnS₂ material for thin-film solar cells [J]. Materials Review A, 2012, 26(5): 129-132 (in Chinese)
[4] Fu N, Xiao X, Zhou X, et al. Electrodeposition of platinum on plastic substrates as counterelectrodes for flexible dye-sensitized solar cells [J]. The Journal of Physical Chemistry C, 2012, 116(4): 2 850-2 857
[5] 蔡文, 胡杰, 向卫东, 等. 花状CuInS₂ 微晶的溶剂热合成及表征[J]. 材料工程, 2010, 38(4):40-45 Cai Wen, Hu Jie, Xiang Weidong, et al. Solvothermal synthesis of flower-like copper indium sulphide microcrystalline and its characterization[J]. Journal of Materials Engineering, 2010, 38(4):40-45
[6] 马贵军, 雷志斌, 鄢洪建, 等. 溶剂热法合成CuInS₂-ZnS 固溶体及其光催化分解水制氢性能[J]. 催化学报, 2009, 30(1): 73-77 Ma Guijun, Lei Zhibin, Yan Hongjian, et al. Photocatalytic hydrogen production on CuInS₂-ZnS solid solution prepared by solvothermal method[J]. Chinese Journal of Catalysis, 2009, 30(1): 73-77
[7] Wibowo R A, Kim W S, Lee E S, et al. Single step preparation of quaternary Cu₂ZnSnSe₄ thin films by RF magnetron sputtering from binary chalcogenide targets[J]. Journal Physics Chemistry Solids, 2007, 68(10): 1 908-1 913
[8] Wibowo R A, Lee E S, Munir B, et al. Pulsed laser deposition of quaternary Cu₂ZnSnSe₄ thin films[J]. Physica Status Solid, 2007, 204(10): 3 373-3 379
[9] Suresh B G, Kishore K Y B, Uday B P, et al. Effect of Cu/(Zn+Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films[J]. Solar Energy Materials & Solar Cells, 2010, 94(2): 221-226
[10] 杨仁德. 太阳电池材料[M]. 北京:化学工业出版社, 2006
[11] 万磊. 铜铟硒薄膜太阳能电池相关材料研究[D]. 合肥:中国科学技术大学, 2010