[an error occurred while processing this directive]
化学工业与工程
 首页 |  在线投稿 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  下载中心 |  出版伦理 |  联系我们 |  English
化学工业与工程 2011, Vol. 28 Issue (1) :29-29    DOI:
研究论文 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << | >>
氨法脱硫洗涤液离子浓度与pH值的关系研究
石 瑞,顾庆伟,刘 峥,李立清
中南大学能源科学与工程学院
Relationship Between pH Value and Ions Concentration of Ammonia Desulphuring Cleaning Solution
SHI Rui, GU Qing-wei, LIU Zheng, LI Li-qing
School of Energy Science and Engineering,Central South University

摘要
参考文献
相关文章
Download: PDF (186KB)   HTML ()   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 应用电中性方程离解理论,建立了氨法脱硫洗涤液离子浓度与pH值的确定性模型,并对其影响因素进行了讨论。研究表明:离子平衡值等于或者接近于10时,模型能准确描述氨法脱硫洗涤液各离子浓度与pH值的确定性关系;碱性离子与酸性离子相对浓度与pH值的相关点分布呈现一种随着碱性离子与酸性离子相对浓度增大,pH值下降的趋势。模型可作为氨法脱硫洗涤液pH值的合理判据。结合试验研究得到洗涤液硫元素存在形态与pH值之间的关系,提出模型修正方法。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
石瑞
顾庆伟
刘峥
李立清
关键词脱硫洗涤液   电离平衡   离子浓度   pH值   电中性     
Abstract: Based on neutral equations dissociated theory, the model was established to describe the relationship between ion concentration of ammonia desulphurization detergent and pH, and its influencing factors were discussed. The results show that when ionic balance value is equal to or close to 10, the model can accurately describe the relations of the ions concentration and pH of desulphuring cleaning mixture. With acid ion and alkaline ion concentration increasing, pH values present a trend to decrease. The model can be used as a reasonable criteria to evaluate pH value of ammonia desulphurization detergent. The diagram between sulfur elements and pH value was obtained with the experimental study, and the model modification methods were put forward.
Keywordsdesulfuring cleaning mixture   ionization balance   ions concentration   pH value   electrical neutral     
引用本文:   
石瑞, 顾庆伟, 刘峥, 李立清.氨法脱硫洗涤液离子浓度与pH值的关系研究[J].  化学工业与工程, 2011,28(1): 29-29
SHI Rui, GU Qing-Wei, LIU Zheng, LI Li-Qing-.Relationship Between pH Value and Ions Concentration of Ammonia Desulphuring Cleaning Solution[J].  Chemcial Industry and Engineering, 2011,28(1): 29-29
Copyright 2010 by 化学工业与工程